Taperssection.com
Gear / Technical Help => Microphones & Setup => Topic started by: Liquid Drum on August 08, 2007, 01:41:50 PM
-
Hi,
Can't seem to find these anywhere. I know they don't make them anymore, but is there a page anywhere on the net that has the full specs?? Or maybe someone knows??
Cheers,
Simon.
-
Hi,
Can't seem to find these anywhere. I know they don't make them anymore, but is there a page anywhere on the net that has the full specs?? Or maybe someone knows??
Cheers,
Simon.
20HZ TO 20KHZ +- 6 DB. Low distortion as good as my mics.
Chris
-
Hi,
Can't seem to find these anywhere. I know they don't make them anymore, but is there a page anywhere on the net that has the full specs?? Or maybe someone knows??
Cheers,
Simon.
20HZ TO 20KHZ +- 6 DB. Low distortion as good as my mics.
Chris
Appreciate the info, thanks.
What about the max db SPL with a 9v SP-SPSB-1 batt box??
-
Hi,
Can't seem to find these anywhere. I know they don't make them anymore, but is there a page anywhere on the net that has the full specs?? Or maybe someone knows??
Cheers,
Simon.
Same as the AT943, or CMC-8 (I think) at soundpros.
Richard
-
only the omni and microlines capsules are 20-20.
the hypers don't go below 70. The cards I forget but I think not below 30 or 50.
-
Thanks, *think* I've found it:
http://www.soundprofessionals.com/cgi-bin/gold/category.cgi?item=SP-CMC-8&type=store&template=specifications
Maximum Input Sound Level 110dB (plug-in power)/125dB(battery box)/145dB(phantom)
I should think 125db should be ok for most rock bands, myabe only extreme metal goes beyond that...
;)
-
Believe me, they overload with standard SPSPSB1 battery box, at a Velvet Revolver gig, half way back on the floor.
With the three-wire mod and battery box, they sound lovely!
By the way, although they don't make them anymore, it's possible to make your own:
Buy the slimline CMC-8s.
Buy the adaptors:
(http://www.soundprofessionals.com/mas_assets/full/AT-ADAPT.jpg)
Trade the small 943 card caps for AT853s.
That's how I built mine, anyway...plus this way, they have the groove in the body for the mini rotating clip.
-
Thanks for the info. Where can I get a decent (not too expensive mind) 3-wire batt-box??
-
Thanks for the info. Where can I get a decent (not too expensive mind) 3-wire batt-box??
there was two in the yard sale....
-
Trade the small 943 card caps for AT853s.
That's how I built mine, anyway...plus this way, they have the groove in the body for the mini rotating clip.
Just curious, why did U trade away the 943 caps for the 853s?
-
Just curious, why did U trade away the 943 caps for the 853s?
I did some listening to recordings, and some experimentation with the small caps while I had use of them, and decided I wanted the slightly beefier AT853 sound.
The difference isn't much, but my ears prefer it.
I now use the 853s about 75% of the time.
The CMC2s (AT831s) get used where it's a new venue, or I know it's a poor sounding venue, where they usually shine.
-
You will find the full specification on www.audio-technica.com.