Taperssection.com

Gear / Technical Help => Recording Gear => Topic started by: SmokinJoe on August 13, 2007, 10:36:46 PM

Title: iRiver 120 torx driver size?
Post by: SmokinJoe on August 13, 2007, 10:36:46 PM

I need to pull apart an iriver, which I presume starts by removing those tiny screws.  I've read it's a T5 screw, but I've got a T5 bit, and it's WAY too big.  These things are tiny.  Any idea what the correct size is?

Title: Re: iRiver 120 torx driver size?
Post by: Javier Cinakowski on August 13, 2007, 10:43:58 PM

torx 5.  sears carries it.  torx 5 is freaking tiny....

Title: Re: iRiver 120 torx driver size?
Post by: SmokinJoe on August 13, 2007, 11:03:48 PM

OK, I'm sure you're right.  Now that I look again, the one I have is a T15.  I'll look for a T5 tomorrow.

Title: Re: iRiver 120 torx driver size?
Post by: Arni99 on August 14, 2007, 08:44:30 AM

i only got a torx 6 which is no problem for disassembling but putting the pieces together again is big pain HAHA with a torx 6. try to get a torx 5 and emergency room will remain empty  ;D!

Title: Re: iRiver 120 torx driver size?
Post by: mmadd29 on August 14, 2007, 01:32:54 PM

It was a bitch finding a T5, Home Depot sells a torx screwdriver that is T4 - T10....it's $5

Title: Re: iRiver 120 torx driver size?
Post by: SmokinJoe on August 15, 2007, 06:14:58 PM

I got a T5 screwdriver for $2.99 at sears.  +T for the tip.