Taperssection.com
Gear / Technical Help => Remote Power => Topic started by: bugg100 on August 14, 2007, 02:44:37 AM
-
I bought an Audiovox specific battery stated as 9v at Target with charger for $9.75 us marked down. I need power for a digi-mod ua-5.
Problem is that with a multimeter it reads @ 8.4v across the terminals. Is this what other generic DVD batts give?
Inside is the normal Li-ion cluster of 4 x 18650 and associated regulating circuit. I took it apart to reverse the polarity at the board as the plug fits the UA-5.
TIA
Joe
-
Bump.
Do the Energizers exceed 9.0 volts really?
TIA,
joe
-
I have a couple of the typical gray "Walmart Batteries". One puts out 9.2V and the other 9.3V, charged a couple of days ago. That's not under load...
Rayovac RV-DVD-03 5400mah LIon
generic EDV004SU 4500mah niMH
I ran my UA-5 off a tired old 12V SLA... after a long festival day the optical output died... I checked the battery with a meter right then and it was down around 6volts (I don't remember exactly). But the point is that 8.4 should run the UA-5 OK.
-
Thanks for the. Info....
Velvet Revolver just took the stage.... Joe