Text only | Text with Images

Taperssection.com

Gear / Technical Help => Ask The Tapers => Topic started by: blu666z on November 05, 2003, 02:32:19 PM

Title: Changing battery cables on UA-5
Post by: blu666z on November 05, 2003, 02:32:19 PM
Ok, so I built a Shapiro cable for my UA-5 a while back.  Been wanting to switch to the adapatplug cord that is coiled.  When you use those, how do you tell which wire would be the + or - since one of them does not have the stripe on it.

-Kevin
Title: Re:Changing battery cables on UA-5
Post by: Chuck on November 05, 2003, 02:39:54 PM
Do you have a VOM? Volt Ohm Meter?
Title: Re:Changing battery cables on UA-5
Post by: Chuck on November 05, 2003, 02:40:45 PM
Quote from: Moke on November 05, 2003, 02:39:49 PM
multimeter to the rescue!

You beat me to it! :)
Title: Re:Changing battery cables on UA-5
Post by: blu666z on November 05, 2003, 03:19:20 PM
No I don't but I could always go buy one.

-Kevin
Title: Re:Changing battery cables on UA-5
Post by: Lee on November 05, 2003, 06:27:53 PM
Quote from: Moke on November 05, 2003, 02:41:21 PM
easiest answer ever? ;D

Can anyone explain why the UA5 has the tip as negative, and ring/sleeve as positive? this seems odd and possibly hazardous to me.

It definatley set my desk on fire when I had mine... never leave that AC adaptor plugged in if the UA-5 isn't connected to the end of it!
Text only | Text with Images