Taperssection.com
Gear / Technical Help => Microphones & Setup => Topic started by: aberg on August 25, 2007, 11:21:38 AM
-
So I ran my ck1x > mk46 > stock 460 > 702 rig last night for the first time. Those ck1x caps are sweet. The detail in the recording is amazing... the only thing I don't like is that the low-end is a little bloated at times... I'm wondering if the JWmod on the 460 bodies would clean this up a bit. I LOVED running the active setup. SO easy to throw up...
-
bump
-
My opinion, which is worth nothing, is not to mod. I'm a fan of tranformers anyways, however, the ck1 caps can tend to be bright at times (though I hands down prefer them to the ck61 cap) and the stock 460 body really compliments the ck1 cap, rather smooths things out. I would tend to think that the modded bodies with the ck1 caps would be unpleasantly bright and a bit harsh, at least for my ears. ymmv
Again, my opinion is worth nothing :P
-
My opinion, which is worth nothing, is not to mod. I'm a fan of tranformers anyways, however, the ck1 caps can tend to be bright at times (though I hands down prefer them to the ck61 cap) and the stock 460 body really compliments the ck1 cap, rather smooths things out. I would tend to think that the modded bodies with the ck1 caps would be unpleasantly bright and a bit harsh, at least for my ears. ymmv
Again, my opinion is worth nothing :P
No, that's a great opinion. Thanks... it's a little premature for me to change things up anyways. I will run them again on Tuesday up close and see how I like things.
-
leave the 460's alone...don't eff with perfection ;)
fwiw....i run the same rig as you...ck1x->mk46->stock 460's->722
-
i think the 1x sound fantastic with the mod 460s, but I prefer the sound of the JW mod over the stock boddies
i've got a recent WSP show I ran ck1x/mk46 > aerco mp-2 > 722 just haven't tracked it out yet but it sounds great.
i think you will notice more of a difference in the mids/highs with the mod than the lowend, but Jim claims that the lowend is extended much lower after the mod, but I think its kinda moot since the Freq response of the caps will still be the limiting factor
-
leave the 460's alone...don't eff with perfection ;)
fwiw....i run the same rig as you...ck1x->mk46->stock 460's->722
I often think that myself, which is why I have stock 460's and JWmods. I still find myself using the mods more, especially straight into the 722 with the CKx caps. When I drag out the V3, I switch to stocks and CK6x caps. The stocks sound much better thru a V3 than the JW's to my ears.
edit: Sorry, I really didn't answer your question. Why don't you try some other things first. Like some roll off, either on the mic bodies or on the 702. Or change your mic pattern a little. Tighten up the spread. Simple things first, before the JW mod. It takes some time to get used to the mod.