Taperssection.com

Gear / Technical Help => Microphones & Setup => Topic started by: darktrain on September 11, 2007, 11:39:15 AM

Title: DPA Microdots
Post by: darktrain on September 11, 2007, 11:39:15 AM

Where can i get the microdot connectors so i can terminate the 4060's or 4061's back to microdot for use with the MMA6000, i have searched but all i find is microdot adapters.

Title: Re: DPA Microdots
Post by: Bernd Out on September 11, 2007, 12:01:17 PM

Tyco now owns this, so hold on to your hat, as to price and the need for special tools.
It is the Tyco way.

MICRODOT CONNECTORS
306 Pasadena Avenue
South Pasadena, CA 91030
Phone: (626) 799-9171
Fax: (626) 799-2439

Customer Service/Technical Support:
800-522-6752

Also:
HERE (http://www.bhphotovideo.com/c/product/282590-REG/DPA_Microphones_DUA6000_DUA6000_Replacement_MicroDot.html)

It may be easier and less expensive to modify the Pre. See this thread:
http://taperssection.com/index.php/topic,21909.0.html

Title: Re: DPA Microdots
Post by: John Willett on September 11, 2007, 12:11:27 PM

Go to DPA - but Sennheiser also do microdots (used for the old SK 2012 transmitters).

But only get them if you need to do lots - the special tools required to fit them are very expensive and I don't think you will get any change from $250 for the tools (maybe more).

Title: Re: DPA Microdots
Post by: darktrain on September 11, 2007, 12:20:14 PM

ok them so I guess i will stay with the 3.5mm plug :o Thanks for the info.