Taperssection.com

Gear / Technical Help => Post-Processing, Computer / Streaming / Internet Devices & Related Activity => Topic started by: Tye on October 08, 2007, 08:46:31 PM

Title: Wavelab help
Post by: Tye on October 08, 2007, 08:46:31 PM

 I'm having a problem in post hoping someone may have an idea of what is going on.

 I taped the Black Crowes and ran a 4 mic mix. I ran it through Audacity 24/48 > 16/44.1 

 I am using Wavelab 3.0 (yeah I know I need to upgrade but it works for now)
the problem I am having is when doing an Audio Montage one source loads up complete but for
some odd reason the second loads up only the first 5 mins or so.
 
 Both files are 1.03 gb and play on my winamp all the way through I have shut down tried again and again
with the same results. I can't imagine why it is happening. 
 
The only new thing I have done is I recently got a  500gb external HD (hitachi H3500U ) which these files are stored on .  Any ideas ?
  Thanks in advance

Title: Re: Wavelab help
Post by: KLowe on October 08, 2007, 08:50:33 PM

try moving them from your external to your main hdd then load.

Sometimes my editing software does not play nice with the external HDD's.   YMMV

Title: Re: Wavelab help
Post by: Tye on October 08, 2007, 08:55:56 PM

I'll give it a shot , I may just put all of my stuff on my internal 160gb hd on the 500gb and just work
from the internal if this works . Transfering 24 bit to the external takes forever anyway ! >:(

Title: Re: Wavelab help
Post by: Tye on October 08, 2007, 09:42:45 PM

That did the trick, thanks!