Taperssection.com
Gear / Technical Help => Microphones & Setup => Topic started by: F0CKER on October 10, 2007, 08:55:23 AM
-
Looking for a windscreen that will fit on the Soundfield ST350...suprisingly they don't offer one (and if they did it would probably be $300). Obviously one of the LD variety. I don't have exact measurements right now but would guess about 2-2.5 inches across and 5-6 inches top to bottom. Anyone run a mic with those dimensions? I'm thinking an AKG C1000 might work.
Just looking for someone with a windscreen around those dimensions to let me know what brand it is so I can do some investigating on my own...not looking to buy yours.
-
Looking for a windscreen that will fit on the Soundfield ST350...suprisingly they don't offer one (and if they did it would probably be $300). Obviously one of the LD variety. I don't have exact measurements right now but would guess about 2-2.5 inches across and 5-6 inches top to bottom. Anyone run a mic with those dimensions? I'm thinking an AKG C1000 might work.
Just looking for someone with a windscreen around those dimensions to let me know what brand it is so I can do some investigating on my own...not looking to buy yours.
Any use?
http://stores.ebay.com.au/DV-Shop23_Microphone-Accessories_Windscreen-Plastic_W0QQcolZ4QQdirZ1QQfsubZ2065398QQftidZ2QQtZkm
You would need to do a bit of hacking (just need to rig a new suspension). Pic shown for internal scale of the blimp...
(http://www.dvcity.com/blimp/new%20small%20blimp%2011.jpg)
This model
http://cgi.ebay.com/Pro-Blimp-windshield-windscreen-for-mic-MKH60-416-ME66_W0QQitemZ120168675219QQihZ002QQcategoryZ51541QQtcZphotoQQcmdZViewItem
would probaly do it. These all come with a dead-cat/rat BTW.
digifish