Taperssection.com

Gear / Technical Help => Microphones & Setup => Topic started by: pwig on October 12, 2007, 07:34:43 PM

Title: church audio cards to microtrack
Post by: pwig on October 12, 2007, 07:34:43 PM

What is the best way to go from these mics to a microtrack?

thanks!

Title: Re: church audio cards to microtrack
Post by: austaper on October 12, 2007, 11:27:46 PM

I think the best way is through the Church Audio 9100 pre amp and then through the sound pro 1'8" mini to 1/4" dual TRS converter.  That is a rock solid connection through the 1/4 inch jacks. 

If you do not have a battery box or pre then I believe the MT will provide enough power if you turn phantom power on but I would recommend sending Chris a PM to verify.  I have not tried that configuration myself.  You do not want phantom power on if you are connecting through the 1/4" jacks.

Title: Re: church audio cards to microtrack
Post by: neutrino on October 13, 2007, 12:10:29 AM

Actually the best way is take a 1/2" drill bit and drill a hole through the center of the microtrack - then route your cable to your R-09 on the other side.. Seriously!

Title: Re: church audio cards to microtrack
Post by: calvinroots on January 02, 2008, 09:43:01 PM

that is hilarious