Print Page - How to delay one channel in Soundforge

Title: How to delay one channel in Soundforge
Post by: anr on October 20, 2007, 01:34:17 PM

Hi

I have a recording which has one channel lagging the other by 0.024s (24 thou). How can I correct this using Soundforge? (And I'm not sure it'll make a difference!). Any advice appreciated.

anr

Title: Re: How to delay one channel in Soundforge
Post by: Evil Taper on October 20, 2007, 03:59:13 PM

Insert that much silence before that file. You might have to generate it as a new file and then copy paste it.

Title: Re: How to delay one channel in Soundforge
Post by: anr on October 20, 2007, 05:09:57 PM

ET

Thanks. Worked it out.

Left Ch leads by .024. Copy LHC to clipboard. Mute LHC. Place cursor at .024. Edit > Paste Special > Mix > paste at cursor.

Title: Re: How to delay one channel in Soundforge
Post by: gratefulphish on October 24, 2007, 07:31:45 PM

+T as I was just about to post the exact same question. Thanks.

Taperssection.com

Gear / Technical Help => Post-Processing, Computer / Streaming / Internet Devices & Related Activity => Topic started by: anr on October 20, 2007, 01:34:17 PM