Taperssection.com
Gear / Technical Help => Ask The Tapers => Topic started by: silentmark on November 13, 2003, 03:10:10 PM
-
I have been using the mini out > to rca in of my modsmb1 and while it works fine, I was thinking of using the XLR outs because of the better connections. I believe the xlr outs are balanced, would I be able to just run these XLR outs > rcas of the modsbm1 or would I have to unbalance first ? How would I do this? :help:
Kinda strange that I have never thought of doing this before, but well now I am . Any suggestions would be greatly appreciated. :)
-
I have been using the mini out > to rca in of my modsmb1 and while it works fine, I was thinking of using the XLR outs because of the better connections. I believe the xlr outs are balanced, would I be able to just run these XLR outs > rcas of the modsbm1 or would I have to unbalance first ? How would I do this? :help:
Kinda strange that I have never thought of doing this before, but well now I am . Any suggestions would be greatly appreciated. :)
XLR RCA
Pin2 (+) --------------- Signal (+)
PIn1+3------------------Shield
there are several companies that make this type of connectors.
marc
-
I've owned a few of these and I remember speaking to a few people that told me only run out of the mini as a last resort. This below is from their site.
Balanced : floating transformerless XLR, nominal level :+6dBu, max +20dBu 600 Ohms
Unbalanced : 3,5mm mini-jack stereo, nominal level : 0dBu, max +14dBu
They are balanced xlr out. I am not sure what, if anything special you would need.
http://www.sonosax.ch/SXM2/sxm2.html
-
I've owned a few of these and I remember speaking to a few people that told me only run out of the mini as a last resort. This below is from their site.
Balanced : floating transformerless XLR, nominal level :+6dBu, max +20dBu 600 Ohms
Unbalanced : 3,5mm mini-jack stereo, nominal level : 0dBu, max +14dBu
They are balanced xlr out. I am not sure what, if anything special you would need.
http://www.sonosax.ch/SXM2/sxm2.html
i would use the XLR out as well. the original question was posed to change XLR > RCA.
he's going from a balanced > unbalanced connection. might as well use the mini-plug if that's easier for him.
marc