Taperssection.com
Gear / Technical Help => Cables => Topic started by: SClassical on November 28, 2007, 09:14:15 PM
-
Anyone know where i can get a connector for my 722 so I can use the L & R line-out jack? I want to make a cable to connect my 722 to my amp.
The next question is really not related but...
Is the D/A converter just as well built as the A/D converter? Would I hear an improvement if I purchase the Grace m902 for my 722? If the D/A converter of the 722 is similar to Grace 902 I guess it's not worth getting the m902.
-
for the mini-xlr:
http://www.bhphotovideo.com/c/product/293007-REG/Sound_Devices_XL4_XL4_4_Piece_TA3_F.html
markertek, parts express, etc for the 1/8" TRS connector.
-
Anyone know where i can get a connector for my 722 so I can use the L & R line-out jack? I want to make a cable to connect my 722 to my amp.
Could you also use this?
BNC(Male) to an RCA(Female):
http://www.baproducts.com/images/rfa-8393.jpg
I got a pair of these recently from Radio Shack for $5 apiece so's to give/take RCA cable patches during shows from the BNC connectors.
-
There is a regular mini jack, so AFAIK you can just plug a mini to double RCA cable from the deck to your stereo.
-
Anyone know where i can get a connector for my 722 so I can use the L & R line-out jack? I want to make a cable to connect my 722 to my amp.
The next question is really not related but...
Is the D/A converter just as well built as the A/D converter? Would I hear an improvement if I purchase the Grace m902 for my 722? If the D/A converter of the 722 is similar to Grace 902 I guess it's not worth getting the m902.
"tape out" should work just fine for ya.
-
Word is that the quality of the tape out is suspect compared to the line outs.
-
I would think the tape out just has slightly lower levels, and it is unbalanced (like home stereo is anyhow).
-
I've patched into my R-09 from a 702 "tape out" jack, and it sounded fine to my ears.