Taperssection.com

Gear / Technical Help => Ask The Tapers => Topic started by: seekup40 on November 18, 2003, 10:51:23 AM

Title: patching md to dat
Post by: seekup40 on November 18, 2003, 10:51:23 AM
I'm using my dat for the first time tonight and i would like to compare the difference between md and dat, what would i need to patch the md into the dat at the show?
Title: Re:patching md to dat
Post by: Brian Skalinder on November 18, 2003, 11:33:48 AM
Quote from: seekup40 on November 18, 2003, 10:51:23 AM
I'm using my dat for the first time tonight and i would like to compare the difference between md and dat, what would i need to patch the md into the dat at the show?

What exactly are you trying to compare:

How you patch your gear together depends on which of the above you want to compare, and the functionality available on your MD.
Title: Re:patching md to dat
Post by: sexymexi on November 18, 2003, 12:29:11 PM
depends on your deck, if you have a full size like mine, it has rca outs, so i used an rca>mini, or if your pre has an rca out then use it, if not, then your gonna have to go mini>mini out from your headphone jack, but i think that will burn up your batteries quicker. but will still work.  i did the same thing the first time i used my dat, and trust me you'll be amazed, i was. +T to ya. hope your first tape sounds as sick as mine.  

matt
Title: Re:patching md to dat
Post by: Scuba Jeremy on November 20, 2003, 08:30:08 AM
I have an MD player in my car stereo, so at shows I'll run the coax out of my UA5 to my DAT, and the optical out to MD so that I can listen to my tape on the way home through the MD. First night I ran my DAT though I ran my old rig with my AT853s > batt box > Sharp SR60 and my new rig with the MC012s > PS2 > M1, and was blown away at the vast difference between them!