Taperssection.com
Gear / Technical Help => Microphones & Setup => Topic started by: ArchivalAudio on February 22, 2008, 09:44:33 PM
-
hey
I am just wondering if any one has any experience
with
the
Naiant X-Q omni pair mics?
http://www.naiant.com/xqspecification.html (http://www.naiant.com/xqspecification.html)
I am wondering for stealth any one try these out?
that are not expensive, and seem small... I prefer cards but these could be pretty good for a loud rock show...
X-Q Specifications
Type: 6mm omnidirectional electret condenser microphone
Phantom Power: +9V to +48V
Plug-in Power: +3V minimum
Current: 1mA maximum
Recommended Input Impedance: 1KΩ minimum
Sensitivity, 1kHz @ 94dBSPL: -38dBV/Pa
Total Harmonic Distortion, 1kHz @ 94dBSPL: 0.3% typical
Maximum Level, 1kHz @ 1% THD: 108dBSPL
Frequency Response: 20Hz to 20kHz
Polar Response, 180°: -3dB @ 10kHz
Self-Noise: 20dBA
Weight: 1.5oz (42g)
Dimensions: 2" x 3/4"ø (51mm x 19mmø)
any real life experiences would be useful
I may be going to a show where these could be cool
for under $100 for the pair
that could be great
thanx in advance for the posts
-
oh I just realized that these only have
Maximum Level, 1kHz @ 1% THD: 108dBSPL
so thay might not be able to handle loud rock show...
any one try these?
-
very cool
I am liking what I am seeing in the new X-M
but at just over 4" those are looong... lol ;)
very cool can't wait to hear more...
thanx
-
Doe you have something that handles around 130spl.......?
Thats the typical magic number I see for rock shows.
Jk
-
oh I just realized that these only have
Maximum Level, 1kHz @ 1% THD: 108dBSPL
so thay might not be able to handle loud rock show...
any one try these?
John makes some good mics and for the price I think they are worth trying. I have heard lots of good things about them and he seems to know what he is talking about. I also think his product looks good too.
Chris
-
I know . . . I know :-[ In the future I might move the whole circuit to surface mount, that could chop an inch off the mic, but for the first PCB run I'll stick with the longer case. There are a lot of components on this board already . . . :o
hey I was just kidding about the length...
but if they could be shorter thats sweet!
-
I ended up ordering some MSH-2's
since they are such a great deal at $29 each...
I figured that they'd be cool to have
and try in some different situations...
:)
-
OtheroneK, 130 dB SPL is about what you might get near the bell of a trombone that's being played fortissimo by a professional. If you'd been recording shows that reached this level at the audience position on anything like a regular basis, you and a lot of other good people would be profoundly and permanently deaf by now.
The highest SPL I have ever measured in live music was just under 122 dB SPL. It was one momentary peak produced by a very impressive, trained opera singer singing at the top of her range (E-flat above high C) during a special vocal exercise in a master class a few years ago. She and her teacher (Dr. Michael Warren here in New York--who as a teacher really does deserve the title of "master" in my opinion) worked up to that note for about ten minutes beforehand.
This level was obtained by placing the microphone a few inches in front of her mouth. I was sitting across the room and where I was sitting, it was a startlingly loud sound. Having a 130 dB SPL limit is nice for special applications (as mentioned above), but practically speaking, for recording at moderate distances, if you have microphones which can handle 120 - 125 dB SPL, you are far more likely to overload a preamp or recorder input with their signals than they are likely to ever be overloaded by sound pressure.
--best regards
-
thanx Jon!
that's a great description...
that's basically what he told me in our email correspondence
and also why I ended up ordering some of the older MSH-2's
-- Ian