Taperssection.com
Gear / Technical Help => Recording Gear => Topic started by: Skydogj on February 26, 2008, 05:22:10 PM
-
:-[
I didn't see the answer to my issue in the Sticky section.
NYE, I lost my DC power cord that goes from the Wall into the switching adapter box.
I have looked everywhere for it.
I packed it up in my gear bag but it didn't make it to the show with me. It is not at home.
Anyone know of a place to get a replacement?
Anyone know of a way to rig up a replacement using Radio Shack parts?
attached is a picture of switching adapter without the needed cable.
Thanks for any and all help!
skydogj
www.myspace.com/skydogj
-
Go to RatShack, they'll have a cable that goes from the wall to the transformer box. It's a fairly universal cable. Just like the one I had to get to power a scanner I bought used. Runs less than $3. Pay particular attention to the shape where it plugs into the transformer; better yet, take the transformer with you so there is no question you get the correct power cord.
-
Go to RatShack, they'll have a cable that goes from the wall to the transformer box. It's a fairly universal cable. Just like the one I had to get to power a scanner I bought used. Runs less than $3. Pay particular attention to the shape where it plugs into the transformer; better yet, take the transformer with you so there is no question you get the correct power cord.
5 volts w/ a "B" adapter I think is what your looking for but best way is to bring your UA5 in to Ratshack for best fit and to try it before you get home.
Peace
-
Thanks guys!
-
for the record...
http://www.radioshack.com/product/index.jsp?productId=2103020&cp
(http://rsk.imageg.net/graphics/product_images/pRS1C-2265444w345.jpg)