Become a Site Supporter and Never see Ads again!

Author Topic: To shrink or stretch?  (Read 5776 times)

0 Members and 1 Guest are viewing this topic.

Online Sloan Simpson

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 3697
  • Gender: Male
    • Southern Shelter
Re: To shrink or stretch?
« Reply #30 on: August 13, 2014, 08:24:29 PM »
I would just question the accuracy of those markers. Like I said, it's gotta be within +/- two samples. But who knows--it could do it. I might play around with it.
Just out of curiosity, why would you doubt them? I would doubt a human before I'd doubt ProTools  :)

Offline hoserama

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 309
  • Gender: Male
Re: To shrink or stretch?
« Reply #31 on: August 15, 2014, 10:04:18 AM »
Because I know how precise they need to be. My main experience is time aligning with monitor mixes from different recorders. So it's generally a pretty clear soundboard-type pull. So any sort of issues with the time alignment and you start getting phasing VERY fast. However, the mixes are sometimes wildly different, so you need to use your common sense to figure out if a sync point is truly a sync point, and not just a similar looking wave form.

See the attached picture. Here's a time alignment that my friend did and I looked over. The dotted lines are the sync markers that he put in, because it looked like that was the start of the snare hit. However, if you look at the whole wave form, at least in that 1/50th of a second view, you'll see the dotted lines don't work. Instead, the correct sync point would be something like where the cursor is, and a majority of the peaks/valleys line up.

I don't really trust an automated program to not get tripped up on minor instances like that, and would end up checking every sync point before processing. That said--if it has some other functionality like ability to move/recalibrate sync points, it could be useful.
Audio: Countryman B3 + SBD feeds
Wireless Receivers: Lots of those
Antennas: Lots of those
Cables: Lots of those
Recorders: Cymatic Utrack24, Cymatic LR16, RME Multiface, Zoom F8, (3) Tascam 680, (2) Tascam 2D, Zoom H6, Zoom H4n, and a graveyard of irivers/nomads/minidiscs.

Offline bombdiggity

  • Trade Count: (11)
  • Needs to get out more...
  • *****
  • Posts: 2286
Re: To shrink or stretch?
« Reply #32 on: August 15, 2014, 10:36:07 AM »
^ Interesting example. 

Other than a truly mono recording aligning channels can be very tricky.  Apparently even with monitor mixes/SBD tracks. 

My experience in dealing with suboptimal L/R stereo sorts of configuration has been that you do need to look at the overall average (lots of reference points) since the discrete channels do not have the same perspective on every event within the overall soundstage.  Aligning an apparent "start" point would not necessarily be the proper alignment for the totality (as the above illustrates). 

The easier aspect is that a L/R stereo or a multitrack where all channels are on the same time clock means shrinking/stretching is not part of the equation, so there is an absolute alignment though slight offsets at almost any point along the timeline are likely (which provides the stereo image).   There's a lot more room for error in the realm of shrinking/stretching. 
Gear:
Audio:
Schoeps MK4V
Nak CM-100/CM-300 w/ CP-1's or CP-4's
SP-CMC-25
>
Oade C mod R-44  OR
Tinybox > Sony PCM-M10 (formerly Roland R-05) 
Video: Varied, with various outboard mics depending on the situation

Online Sloan Simpson

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 3697
  • Gender: Male
    • Southern Shelter
Re: To shrink or stretch?
« Reply #33 on: August 15, 2014, 01:16:33 PM »
Elastic Audio does allow you to reposition the markers if you wish. When syncing a stereo room track with a stereo soundboard track I've never needed to though, it's worked perfectly.


 

RSS | Mobile
Page created in 0.063 seconds with 45 queries.
© 2002-2019 Taperssection.com
Powered by SMF