Become a Site Supporter and Never see Ads again!

Author Topic: Gaps with burning DVD-As with wavelab...  (Read 6143 times)

0 Members and 1 Guest are viewing this topic.

Offline Joe w.

  • esniper
  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 5035
  • Gender: Male
  • Turn JB Up
Re: Gaps with burning DVD-As with wavelab...
« Reply #30 on: March 07, 2005, 06:21:52 PM »
I have the toshiba and am interested if the player is the problem. Have we determined that as fact?
2016 National Champions
five generations with an unlocked door and a loaded burglar alarm

Offline nickgregory

  • Admitted Jeter Homer
  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 22386
  • Gender: Male
    • Hurricanes Insider
Re: Gaps with burning DVD-As with wavelab...
« Reply #31 on: March 07, 2005, 06:23:46 PM »
I know for a fact that the HD-841 is the problem....however daryan I believe posted that he had no issues with the toshiba...ymmv

Offline nickgregory

  • Admitted Jeter Homer
  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 22386
  • Gender: Male
    • Hurricanes Insider
Re: Gaps with burning DVD-As with wavelab...
« Reply #32 on: March 07, 2005, 06:24:27 PM »
anyone had a hard time with the toshiba 4690 not playing well with Wavelab burned discs? I just sent a few to a friends and he says they are not playing well together...

thanks

is he getting gaps between songs?  if so that is what I had....it is a buffer issue as I understand it, at least for my player

Offline wboswell

  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 3413
  • Gender: Male
  • Don't call what you're wearing an outfit
    • Trey Woodruff on guitar
Re: Gaps with burning DVD-As with wavelab...
« Reply #33 on: March 07, 2005, 09:43:35 PM »
anyone had a hard time with the toshiba 4690 not playing well with Wavelab burned discs? I just sent a few to a friends and he says they are not playing well together...

thanks

is he getting gaps between songs?  if so that is what I had....it is a buffer issue as I understand it, at least for my player

He said the disc would play 30 seconds of a track, then skip to the next track.  After the first 3 tracks, it played the disc fine.  The second disc, however, was totally screwed.  It was jumping around from track to track he said.

Joe, I'll give you the discs to try out at home...

Offline nickgregory

  • Admitted Jeter Homer
  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 22386
  • Gender: Male
    • Hurricanes Insider
Re: Gaps with burning DVD-As with wavelab...
« Reply #34 on: March 07, 2005, 10:04:36 PM »
different problem than I have....mine play fine, just put in gaps due to a buffer issue

Offline Kyle

  • Made it back alive!
  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 2174
  • Gender: Male
  • Still loves his mic pre's
Re: Gaps with burning DVD-As with wavelab...
« Reply #35 on: March 08, 2005, 12:16:55 AM »
I just got a Toshiba 4960 today - and I am returning it tomorrow. :(

3 problems right off the bat

gaps with dvd-a discs burned in wavelab
composite video  out does not work
play/pause and stop buttons on remote do not work when a disc is in the player (sounds crazy but true)

I tested a Pioneer 578a at Curcuit City today and it seemed to work fine - no gaps at least. I think I'm gonna pick it up tomorrow
Schoeps CMC6/MK4  //  Nakamichi CM-300/CP-1/CP-2
E.A.A. PSP-2   // Grace Design Lunatec V2
Sonic AD2K+ 
Tascam HD-P2 (Oade BCM)  //  Sony TC-D5 PROII
 
Duncan - 12/84 > 8/8/05 - Miss you everyday

Offline F.O.Bean

  • Team Schoeps Tapir that
  • Trade Count: (126)
  • Needs to get out more...
  • *****
  • Posts: 40689
  • Gender: Male
  • Taperus Maximus
Re: Gaps with burning DVD-As with wavelab...
« Reply #36 on: March 08, 2005, 02:15:56 AM »
nice kyle, lemme know what works out for you so i can buy the same thing :)
Recording Gear:
Schoeps MK 4 (MP) & MK 41V (MP) Capsules ->
Schoeps 250/0 KCY's X2 ->
Naiant +60v/Low Noise PFA's x2 ->
DarkTrain Right Angle Stubby XLR's x2 ->
Sound Devices MixPre-6 & MixPre-3 ->
SanDisk 128gb Extreme Pro & 64gb Ultra Plus

Portable Playback Gear:
Campfire Audio Andromeda & Dorado IEM's ->
Linum G2 SuperBax & Bax 3.5mm | FiiO LC 2.5c 2.5mm ->
Shanling Audio M5s | Sony NW-A35 DAP's

DAW:
Dell Inspiron 5570-5521 SLV Laptop
(Pentium i5/8gb RAM/256gb SSD)

http://www.archive.org/bookmarks/diskobean | http://www.archive.org/bookmarks/Bean420 | http://bt.etree.org/mytorrents.php

Offline Kyle

  • Made it back alive!
  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 2174
  • Gender: Male
  • Still loves his mic pre's
Re: Gaps with burning DVD-As with wavelab...
« Reply #37 on: March 08, 2005, 07:54:52 PM »
nice kyle, lemme know what works out for you so i can buy the same thing :)

I picked up the Pioneer DV-578a today and I am putting thru the paces now. So far, it has played back everything I have tried SACD, DVD-A(wavelab, no gaps ;D) redbook, commercial dvds. I do not have any burned dvds (movies, etc) so I have no tried those yet. Sounds good, a bit cleaner than my Sony dvp-ns700p. The Pioneer seems to have a bit less bass, but I think the bass is tighter, whereas with the Sony it is kind of thumpin'. The Sony also seems to be a little brighter. I have quite a bit more listening to do so more later....
Schoeps CMC6/MK4  //  Nakamichi CM-300/CP-1/CP-2
E.A.A. PSP-2   // Grace Design Lunatec V2
Sonic AD2K+ 
Tascam HD-P2 (Oade BCM)  //  Sony TC-D5 PROII
 
Duncan - 12/84 > 8/8/05 - Miss you everyday

Offline Craig T

  • Trade Count: (8)
  • Needs to get out more...
  • *****
  • Posts: 4270
    • LMA
Re: Gaps with burning DVD-As with wavelab...
« Reply #38 on: March 09, 2005, 09:06:33 AM »
I had a 4960 and didn't experience any problems with burned DVDA's.
Schoeps cmc6/4v / Line Audio CM3, OM1 / ADK A51 / Church Audio CA-14
Naiant Tinybox v2.2 / NBox(P) / Apogee Mini-MP / Church Audio ST9200 / CA-UGLY
Sony PCM-M10 / Tascam DR-70D

Offline nickgregory

  • Admitted Jeter Homer
  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 22386
  • Gender: Male
    • Hurricanes Insider
Re: Gaps with burning DVD-As with wavelab...
« Reply #39 on: March 09, 2005, 09:08:13 AM »
I had a 4960 and didn't experience any problems with burned DVDA's.

burned with wavelab?  Frank Sulloway was telling me there are very small gaps on his DVD-As with the 4960...maybe it is the brand of DVD-As...anyone use any different types than fuji -rs?

Offline Craig T

  • Trade Count: (8)
  • Needs to get out more...
  • *****
  • Posts: 4270
    • LMA
Re: Gaps with burning DVD-As with wavelab...
« Reply #40 on: March 09, 2005, 09:15:46 AM »
I had a 4960 and didn't experience any problems with burned DVDA's.

burned with wavelab?  Frank Sulloway was telling me there are very small gaps on his DVD-As with the 4960...maybe it is the brand of DVD-As...anyone use any different types than fuji -rs?

Not 100% sure about WaveLab since I typically use DiscWelder Bronze, but there are a few WaveLab discs in my collection and I never noticed a gap problem.
Schoeps cmc6/4v / Line Audio CM3, OM1 / ADK A51 / Church Audio CA-14
Naiant Tinybox v2.2 / NBox(P) / Apogee Mini-MP / Church Audio ST9200 / CA-UGLY
Sony PCM-M10 / Tascam DR-70D

Offline Nicaragua

  • Trade Count: (1)
  • Taperssection Member
  • ***
  • Posts: 280
  • Gender: Male
Re: Gaps with burning DVD-As with wavelab...
« Reply #41 on: March 09, 2005, 11:09:56 PM »
I have the 4960. always gaps w/ wavelab.  no gaps w/ Audio DVD creator.  debating on whether or not to give Discwelder a shot.... :-\
currently reassembling my rig due to theft by Greyhound Bus Inc employees.

Offline wboswell

  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 3413
  • Gender: Male
  • Don't call what you're wearing an outfit
    • Trey Woodruff on guitar
Re: Gaps with burning DVD-As with wavelab...
« Reply #42 on: March 11, 2005, 01:03:53 PM »
I downloaded the demo of audio dvd creator and I had some issues with it.  Seemed pretty buggy...  I may try it again, b/c its a great idea.

Offline nickgregory

  • Admitted Jeter Homer
  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 22386
  • Gender: Male
    • Hurricanes Insider
Re: Gaps with burning DVD-As with wavelab...
« Reply #43 on: March 11, 2005, 09:21:55 PM »
yeah, I am going to try discwelder and dvd-audio creator this weekend...will report back....hopefully one will work without gaps...

Offline nickgregory

  • Admitted Jeter Homer
  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 22386
  • Gender: Male
    • Hurricanes Insider
Re: Gaps with burning DVD-As with wavelab...
« Reply #44 on: March 12, 2005, 02:39:18 PM »
dvd audio creator worked without gaps...seems like a reasonable alternative....going to try discwelder next...

 

RSS | Mobile
Page created in 0.219 seconds with 42 queries.
© 2002-2019 Taperssection.com
Powered by SMF