Become a Site Supporter and Never see Ads again!

Author Topic: I just got my M-Audio Firewire 410  (Read 5957 times)

0 Members and 1 Guest are viewing this topic.

Offline MattD

  • Taper Emeritus
  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 4641
  • Gender: Male
Re:I just got my M-Audio Firewire 410
« Reply #30 on: September 09, 2003, 03:17:57 PM »
There's a list of them that come up when you push the key during setup. There are also "advanced" and a few other settings. Basically this setting dictates which hardware abstraction layer (HAL) is used by the OS. I know it has to do with power saving features, among other things. Can anyone clarify further?
Out of the game … for now?

Offline Simp-Dawg

  • Bad Little Dawggie
  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 15085
  • Gender: Male
  • Daddy needs a drink!
    • Colorado Tapers
Re:I just got my M-Audio Firewire 410
« Reply #31 on: September 09, 2003, 05:09:30 PM »
i had to deal with this for a while when trying to get my picturebook to work 24bit with my usbpre, but it never worked right and i had more problems in the standard pc mode than i wanted to deal with because certain drivers didn't work right i believe...hopefully YMWV (your mileage will vary)
CO Crüe Benchwarmer

Playback: Denon DVD-2910 > Denon AVR-3806 > Segue Doghouse Speaker Cable > B&W DM-610i / Klipsch RW-10 Subwoofer

Offline dklein

  • Trade Count: (0)
  • Taperssection All-Star
  • ****
  • Posts: 1191
  • Gender: Male
Re:I just got my M-Audio Firewire 410
« Reply #32 on: September 10, 2003, 02:31:55 AM »
i had to deal with this for a while when trying to get my picturebook to work 24bit with my usbpre, but it never worked right and i had more problems in the standard pc mode than i wanted to deal with because certain drivers didn't work right i believe...hopefully YMWV (your mileage will vary)
Yeah - I'll second that.  You might be entering a mine field.  I think it'll be up to you to manage the IRQ conflicts and you probably have too many devices for permanent allocations.  With a regular install, the devices only appear to be sharing one IRQ - windows is dynamically allocating them.

right click 'My Computer
properties
device manager
view, resources by type
then expand the 'Interrupt Request' section to see the allocation - they're not really all on IRQ9.
KM 184 > V2 > R4
older recording gear: UA-5  / emagic A62 / laptop / JB3 / CSB / AD20 / Sharp MT-90 / Sony MDS-JE510
Playback: Pioneer DV-578 > Lucid DA 9624 >many funny little british boxes > Linn Isobarik PMS

Offline dmonterisi

  • Taper Emeritus
  • Site Supporter
  • Trade Count: (2)
  • Needs to get out more...
  • *
  • Posts: 11963
  • Gender: Male
  • Stomach Full of Regret
Re:I just got my M-Audio Firewire 410
« Reply #33 on: September 10, 2003, 09:23:43 AM »
i decided yesterday once i saw wes' post about changing the OS to standard PC mode and the problems that might raise to just suck it up and get the nuendo digiset (little cheaper than the multiset w/o the analog i/o)...it just doesn't seem to me that the testing and support for this product was sufficient to make it as reliable as I'd hoped.  i'd rather be confident that the system is gonna work the way i want it.  and given how much less of a strain on pc resources the nuendo is versus something working exclusively off the firewire bus, it seems like an overall much more reliable solution.

DaryanLenz

  • Guest
  • Trade Count: (0)
Re:I just got my M-Audio Firewire 410
« Reply #34 on: September 11, 2003, 10:57:49 AM »
It has to do with interrupt allocation.  Windows asigns different devices to use different irq's when set up in their aspi auto feature.  The stadard PC mode uses more power, but allows for each device to sit on its own irq port, thus not sharing resources and enabling its full functionality on that particular irq.  My windows 2000 pro I use is set up as standard PC.  Often you can by pass all the BS by going into bios and changing your os type from plug and play to non-plug and play.  I would try that first, it generally works quite well.

Daryan

Offline Wes

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 720
  • Gender: Male
Re:I just got my M-Audio Firewire 410
« Reply #35 on: September 11, 2003, 04:14:15 PM »
Could some one give me some insight on how to change it?
" Radio Shack md440zrs>high pass filter>whopper a>d "

DaryanLenz

  • Guest
  • Trade Count: (0)

 

RSS | Mobile
Page created in 0.147 seconds with 34 queries.
© 2002-2019 Taperssection.com
Powered by SMF