Become a Site Supporter and Never see Ads again!
Previous topic - Next topic
Pages: Pages1   Go Down

Author Topic: Modding Zoom H4, pictures (Polish)  (Read 3,644 times)

0 Members and 1 Guest are viewing this topic.

Offline sunjan

  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 2,006
  • Taping since 1988, 28 years of fine recordings...
    • Just a handful of stuff I put on etree
Modding Zoom H4, pictures (Polish)
« on: July 28, 2008, 06:07:09 AM »
I don't know if this has been posted here, but it looks interesting.

http://translate.google.com/translate?u=http://www.monterdiy.vel.pl/?p=121

The original post is in Polish, but I reckon that the mod deals with minimizing interference and digital noise.
Maybe some Polish TS members can elaborate?
Logged
Mics: A-51s LE, CK 930, Line Audo CM3, AT853Rx (hc,c,sc),  ECM 121, ECM 909A
Pres: Tinybox, CA-9100, UA5 wmod
Recorders: M10, H116 (CF mod), H340, NJB3
Gearbag: High Sierra Corkscrew
MD transfers: MZ-RH1. Tape transfers: Nak DR-1
Photo rig: Nikon D70, 18-70mm/3.5-4.5, SB-800

Offline oivindi

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 34
Re: Modding Zoom H4, pictures (Polish)
« Reply #1 on: July 28, 2008, 08:14:36 AM »
Btw, what happened to that 600Hz noise that appears when the H4 is running on battery?

Is it still there (pre-mod)?
Logged

Offline Carlos E. Martinez

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 246
Re: Modding Zoom H4, pictures (Polish)
« Reply #2 on: July 28, 2008, 06:07:17 PM »
Quote from: oivindi on July 28, 2008, 08:14:36 AM
Btw, what happened to that 600Hz noise that appears when the H4 is running on battery?

Is it still there (pre-mod)?

If the translation is right, apparently Zoom didn't do anything on the hardware to solve the problem. So the mod still goes.
Logged
Pages: Pages1   Go Up
Previous topic - Next topic
 

RSS | Mobile
Page created in 0.051 seconds with 26 queries.
© 2002-2026 Taperssection.com
Powered by SMF