Become a Site Supporter and Never see Ads again!

Author Topic: Olympus LS-10 questions  (Read 7608 times)

0 Members and 1 Guest are viewing this topic.

Offline travelinbeat

  • Trade Count: (14)
  • Needs to get out more...
  • *****
  • Posts: 2319
  • Gender: Male
  • Turning soundwaves into zeros and ones since 1999
    • http://db.etree.org/travelinbeat
Re: Olympus LS-10 questions
« Reply #15 on: September 12, 2008, 11:20:09 AM »
any inputs on how the LS-10 measures up against the R-09HR?  I'm soon to make the investment in a 24bit recorder for primarily loud, stealth rock shows and I'd be very curious to hear any insights.
Mics: Busman BSC1's K1/K2/K3/K4, CA-14's
Units: 2x Edirol R-09HR, iRiver H120 (RockBox + 2200mAh + CF mod)
Power & Accessories: Naiant Littlebox 1.5, Church ST-9100, Denecke PS-2, 2x Kingston SDHC (Model: SD2/8GB), 2x Kingston SDHC (Model: SD4/16GB), Kingston 32GB (Model: SD4/32GB), Darktrain XLR, 2x Shure A81WS's, 4x Powerex 9.6v, 12x Sanyo 2700 NiMH, 2x AT8410A's

Team DC · Team Naiant · Team Busman · Team Church Audio · NFL Team is NY Jets

I tape in earnest dedication to the mission of breaking the back of the CTOA

Offline Arni99

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 770
  • Gender: Male
Re: Olympus LS-10 questions
« Reply #16 on: September 12, 2008, 01:28:22 PM »
any inputs on how the LS-10 measures up against the R-09HR?  I'm soon to make the investment in a 24bit recorder for primarily loud, stealth rock shows and I'd be very curious to hear any insights.
http://www.avisoft.com/recordertests.htm

24bit seems resulting in very low noise on the ls-10.

Nevertheless there is still no firmware upgrade to record more than 2GB without shutting down.
MIC-IN should work fine also for loud shows with low-sens-mics such as DPA 4061 and the "built-in" roll off would be perfect for 4061s (I´m talking about the roll-off which is always there for built-in mics and mic-in recordings - on LINE-IN there is no default roll-off as guysonic already mentioned)  ;).
HIGH-sens-mics on line-in should produce enough output as shown on this torrent with 2 short samples:
http://www.dimeadozen.org/torrents-details.php?id=212223
« Last Edit: September 12, 2008, 01:39:28 PM by Arni99 »
1st: SONY PCM-M10 + DPA 4060's + DPA MPS 6030 power supply (microdot)
2nd: iPhone 5 + "Rode iXY" microphone/"Zoom IQ5" microphone

Offline Arni99

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 770
  • Gender: Male
Re: Olympus LS-10 questions
« Reply #17 on: October 07, 2008, 04:24:47 AM »
Tomorrow I´ll be taping the 1st part of a rock-show in a small club with the LS-10 internals and the 2nd part with my DPA 4061+bbox on MIC-IN with it´s "natural" bass-roll-off ;).
Will post some samples here....
I really "love" the LS-10 a lot! :)
1st: SONY PCM-M10 + DPA 4060's + DPA MPS 6030 power supply (microdot)
2nd: iPhone 5 + "Rode iXY" microphone/"Zoom IQ5" microphone

 

RSS | Mobile
Page created in 0.042 seconds with 27 queries.
© 2002-2025 Taperssection.com
Powered by SMF