Become a Site Supporter and Never see Ads again!

Author Topic: CMC8 with Zoom H2 ... don't know which selection to order  (Read 9825 times)

0 Members and 1 Guest are viewing this topic.

Offline Bury420

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 14
Re: CMC8 with Zoom H2 ... don't know which selection to order
« Reply #30 on: March 02, 2009, 11:38:28 AM »
1st try. changed the input level 2 times as you can hear

link removed...
« Last Edit: March 02, 2009, 03:14:23 PM by Bury420 »

Offline fmaderjr

  • Trade Count: (16)
  • Taperssection All-Star
  • ****
  • Posts: 1966
Re: CMC8 with Zoom H2 ... don't know which selection to order
« Reply #31 on: March 02, 2009, 01:45:52 PM »
It sounds OK to me, but the wave form looks terrible-I'm surprised there isn't audible clipping. Were you using a limiter? Kind of looks like the wave forms a friend of mine use to get recording loud concerts using auto level on a Mini-Disc recorder.

Next time, record in 24 bit try to get your levels to peak around -12 dB. Then you can boost in post without adding noise but you will maintain headroom to minimize the chance of clipping or compressiing the wave form if a limiter was involved.
AT853's (all caps)/CM-300 Franken Naks (CP-1,2,3)/JBMod Nak 700's (CP-701,702) > Tascam DR-680
Or Sonic Studios DSM-6 > M10

Offline Bury420

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 14
Re: CMC8 with Zoom H2 ... don't know which selection to order
« Reply #32 on: March 02, 2009, 01:55:31 PM »
it's not the master. I changed some settings in Izotope RX. That should be the problem.

nameloc01

  • Guest
  • Trade Count: (0)
Re: CMC8 with Zoom H2 ... don't know which selection to order
« Reply #33 on: March 02, 2009, 04:37:33 PM »
The most important piece advise was overlooked....take a THOROUGH piss before hitting record.

Offline Bury420

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 14
Re: CMC8 with Zoom H2 ... don't know which selection to order
« Reply #34 on: March 02, 2009, 04:54:32 PM »
I recorderin 24 bit and no limiter was used.

Offline fmaderjr

  • Trade Count: (16)
  • Taperssection All-Star
  • ****
  • Posts: 1966
Re: CMC8 with Zoom H2 ... don't know which selection to order
« Reply #35 on: March 02, 2009, 05:12:30 PM »
That's more like it! Sounds good and looks good.

Wish I could have done as well my first time out.

Watch ut for that Rx until you learn how to use it-it really did a job on your first sample.

AT853's (all caps)/CM-300 Franken Naks (CP-1,2,3)/JBMod Nak 700's (CP-701,702) > Tascam DR-680
Or Sonic Studios DSM-6 > M10

Offline Bury420

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 14
Re: CMC8 with Zoom H2 ... don't know which selection to order
« Reply #36 on: March 11, 2009, 04:30:25 PM »
do you like the result?

http://rapidshare.com/files/208091308/wavekomplett02.mp3

Should I put the db down a bit?

This is a song with pretty much bass...

Offline fmaderjr

  • Trade Count: (16)
  • Taperssection All-Star
  • ****
  • Posts: 1966
Re: CMC8 with Zoom H2 ... don't know which selection to order
« Reply #37 on: March 11, 2009, 07:02:53 PM »
Sounds great to me!

Lowering the dB can't do anything to improve the sound. Raising it too much can hurt the sound if it causes clipping, but once that happens, if the clipped file has been saved, lowering it back won't remove the clipping.

If you mean should you lower the dB of the bass, it sounds fine to me the way it is, but that's a personal decision.
« Last Edit: March 11, 2009, 07:14:57 PM by fmaderjr »
AT853's (all caps)/CM-300 Franken Naks (CP-1,2,3)/JBMod Nak 700's (CP-701,702) > Tascam DR-680
Or Sonic Studios DSM-6 > M10

 

RSS | Mobile
Page created in 0.053 seconds with 38 queries.
© 2002-2024 Taperssection.com
Powered by SMF