Become a Site Supporter and Never see Ads again!

Author Topic: DPA 4080 is it a good solution ?  (Read 1730 times)

0 Members and 1 Guest are viewing this topic.

Offline chrisv31

  • Trade Count: (3)
  • Taperssection Regular
  • **
  • Posts: 88
  • Gender: Male
DPA 4080 is it a good solution ?
« on: April 22, 2009, 05:22:11 PM »
HI,
I4ve a set of dpa 4061 omi and I4m looking for something to do cardiod recordings but still with mimiature stuffs so I'm thinking of a set of DPA 4080
What do you think about about it?

I'll be very interested to get a mp3 sample of a concert recorded that way
Thanks in advance

Chris
DPA 4061 + MPS 6030 + LS 10 Olympus
NEUMANN KM140 + Neumann BS48i-2

Offline Scooter123

  • "I am not an alcoholic. I am a drunk. Drunks don't go to meetings."
  • Trade Count: (9)
  • Needs to get out more...
  • *****
  • Posts: 3816
Re: DPA 4080 is it a good solution ?
« Reply #1 on: April 27, 2009, 09:54:17 AM »
I wish someone with extra money would just buy a pair and let us  know what they are like.  Come on, somebody out there must have an extra grand.  I love my dpa omnis.
Regards,
Scooter123

mk41 > N Box  > Sony M-10
mk4 > N Box > Sony M-10

Offline WiFiJeff

  • Trade Count: (1)
  • Taperssection Member
  • ***
  • Posts: 981
  • Gender: Male
  • I tape therefore I am.
Re: DPA 4080 is it a good solution ?
« Reply #2 on: April 27, 2009, 10:05:12 AM »
I have posted several times on this mic, I got it when it first came out.  It was not intended as anything but a bodyworn levalier mic, and had a fast bass roll-off, but as a 4060 user I had high hopes.  While it did not sound much worse than any other tiny cardioid, it was definitely not what I wanted.  What I can STRONGLY recommend is the "modded" 4099, which although a hyper cardioid has a much better bass response and is usable at distances (though I have been running 4 tracks with the 4063s, (for powering reasons, instead of 4060s) to pick up even better bass).  I have sent some samples of the 4099 and 4099-plus-omnis to a couple of TS posters who asked, but have not yet gotten up the samples I promised (busy busy until June).

Jeff

 

RSS | Mobile
Page created in 0.032 seconds with 27 queries.
© 2002-2024 Taperssection.com
Powered by SMF