Do I want right-angle cables for the UA5?

[bhadella]

I would love to pickup greenone's 20' BLUE Kiwi cables but it seems like right angles would be more appropriate w/the UA5.  Any UA5 users using straight xlrs into the front panel?  Is it awkward? I'm such a gnoob....

Also, I will be running the UA5 into my D8.  How do most folks have these situated to use in the field? Vertical? Horizontal?

Thanks

Brian

[bhadella]

Moke is always on top of it! Looks like plenty of folks are using straights into the UA5, although seximexi's look like he's been using those quite a bit.  

[greenone]

~Turn off all forums except rig pictures, (make sure this one is highlighted!).

After months and months of going click-click-click-click on EVERY SINGLE CHECKBOX, I just today figured out that the "check all" box will also uncheck all. Might save some time for people like me who hate using the mouse (I'm a keyboard geek, what can I say?)

My two rubles, though I'm not a UA5 user - right-angles on the top panel aren't as big a deal if you're running it vertically though it's nice to get the cables out of the way so they're not sticking straight up in the air. I haven't seen many RA's in the field on UA5's but that's just my obesrvation. I opted for RA's because I run a V2 which only has XLRs in the back and I didnt' want to stress my connections. If/when I go to a 6v V2 instead of a 12v V2 I'll go to a right-angle power cable to completely take the stress off the XLRs...

[blu666z]

I run my UA-5 vertical and normally have right angles on both ends.  Run it out of a Nova5.  The RAs allow you to close the lid basically all the way.  I am gonna be running some straight cables for a while becasue I ended up with a short in the other set.  Shouldn't be a big deal either way though.

-Kevin

[Joe w.]

http://www.taperssection.com/yabbse/index.php?board=20;action=display;threadid=3115