Edirol R09HR help on recording level

[taper2000_uk]

Hi tapers
I have just received an Edirol R09HR and having gone through the instruction manual, I think I may have received a faulty machine. The problem is that the input level buttons do not make any difference to the recording level when changed from 0 to 99. When I press record the sound is recorded and does not peak. Have I somehow set an automatic recording level that does not appear to be mentioned in the manual?
Any help out there please.

[fmaderjr]

Sounds like you figured it out yourself. Try turning the Limiter/AGC switch on the back of your machine to off.

[taper2000_uk]

Thanks for the help, however still the same thing - no change from the input levels but recording level remains the same.

[digifish_music]

Thanks for the help, however still the same thing - no change from the input levels but recording level remains the same.

The INPUT recording level only goes from 0 to 80 (left side buttons)...the headphone output volume goes from 0 to 100 (right-side buttons).

Which side are you manipulating?

If it is the left side and your ACG/Limiter switch on the back is OFF (switch to the left), then you may have a faulty unit. I would however start with a Factory reset...

Menu > 12 Factory reset (at the bottom of the list).

digifish

[taper2000_uk]

D'oh!!! You are so right- put it down to my age!Thanks very much.I'd just packed it up ready to send it back. Not anymore though.

Cheers

[digifish_music]

D'oh!!! You are so right- put it down to my age!Thanks very much.I'd just packed it up ready to send it back. Not anymore though.

Cheers

More good news...

http://taperssection.com/index.php?topic=127756.0

The latest firmware has more features (built in tuner) etc...

digifish

[taper2000_uk]

Better get used to using the current firmware (and controls)first!