Become a Site Supporter and Never see Ads again!

Author Topic: Mixing and matching capsules (from other models and manufactures )  (Read 2786 times)

0 Members and 1 Guest are viewing this topic.

Offline Javier Cinakowski

  • !! Downhill From Here !!
  • Trade Count: (11)
  • Needs to get out more...
  • *****
  • Posts: 4325
  • Gender: Male
Perhaps we could create a list of compatable mics?

List:

  • Audix SCX1  <->  MBHO603a
  • AT853 -> ES943 (w/ adpter ring)
  • Busman <->  Avantone <-> Mercenary Audio MFG KM-69
  • Peluso CEMC6 <-> Feilo CR1-14 <-> Advanced Audio Microphones CM-54 <-> CharterOak M900
  • Chameleon Labs TS-1(w/ adpter ring) <- AKG CK
  • Oktava MC012 <- Red
  • Rode NT4/5/6/55 <-> Studio Projects C4
« Last Edit: July 19, 2008, 01:03:18 PM by Javier Cinakowski »
Neumann KM185mp OR DPA ST2015-> Grace Design Lunatec V2-> Tascam DR-100mkIII

Offline heyitsmejess

  • Trade Count: (2)
  • Taperssection All-Star
  • ****
  • Posts: 1208
  • Gender: Male
Re: Mixing and matching capsules (from other models and manufactures )
« Reply #1 on: July 01, 2008, 03:37:15 PM »
cascade m39 are 22mm solid body (FWIW)

only card caps, tho
cause we zig and zag between good and bad
stumble and fall on right and wrong


http://www.rumpkemountainboys.org/

Offline Todd R

  • Over/Under on next gear purchase: 2 months
  • Trade Count: (29)
  • Needs to get out more...
  • *****
  • Posts: 4902
  • Gender: Male
Re: Mixing and matching capsules (from other models and manufactures )
« Reply #2 on: January 21, 2010, 02:52:43 PM »
Resurrecting an old thread --

Does anyone know whether the Busman/Avantone capsules can be used on the Peluso cemc6 bodies and vice versa?  They all look to be 20mm capsule (diaphragms that is) on 22mm bodies.
Mics: Microtech Gefell m20/m21 (nbob/pfa actives), Line Audio CM3, Church CA-11 cards
Preamp:  none <sniff>
Recorders:  Sound Devices MixPre-6, Sony PCM-M10, Zoom H4nPro

 

RSS | Mobile
Page created in 0.036 seconds with 27 queries.
© 2002-2025 Taperssection.com
Powered by SMF