If you don't want to turn down the ouput gain on the preamp to a level the recorder input can manage, you can insert pads after the hot output and send the signal along to most any recorder you like.
That's how many run Grace and other high output capable preamps into small recorders. But you don't have to do that.. I used to run the V3 analog out into an R-09 and just turned the mic gain way down. Signal barely registered a few lights on the V3 meters, but sounded more than fine with no noise problems. My R09's have been replaced by DR2d's and I only run the V3 digital out into other recorders these days, but I could run it into the DR2d. If I wanted to do that regularly, I'd use external pads or build some attenuating interconnects.