Become a Site Supporter and Never see Ads again!
Previous topic - Next topic
Pages: Pages1   Go Down

Author Topic: Sansom Phantom Power Adapter Q  (Read 4,710 times)

0 Members and 1 Guest are viewing this topic.

Offline blu666z

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 3,189
  • AT ES943(H/C/O caps) » JKLab PP9 Pre » wmod UA-5
Sansom Phantom Power Adapter Q
« on: April 05, 2004, 12:59:34 PM »
I know the mini input side of this is male.  What is the output side?

-Kevin
Logged

Offline lds490

  • Demon_In_Disguise
  • Trade Count: (1)
  • Taperssection Member
  • ***
  • Posts: 654
  • Ride the llama!
    • Music List
Re:Sansom Phantom Power Adapter Q
« Reply #1 on: April 05, 2004, 01:04:57 PM »
I'm looking at a defective one of these (Samson PM4 Phantom Microphone Adapter) right now.  Output is male.
Logged
http://db.etree.org/lds490
Open: Studio Projects C-1s-> Mic2496 -> PDAudio-CF (IPAQ 5555) -> Addonics Pocket EX
Stealth: AT 831 -> Mic2496 -> PDAudio-CF (IPAQ 5555) -> IBM Microdrive

Offline blu666z

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 3,189
  • AT ES943(H/C/O caps) » JKLab PP9 Pre » wmod UA-5
Re:Sansom Phantom Power Adapter Q
« Reply #2 on: April 05, 2004, 01:09:36 PM »
So both ends are male correct?

-Kevin
Logged

Offline lds490

  • Demon_In_Disguise
  • Trade Count: (1)
  • Taperssection Member
  • ***
  • Posts: 654
  • Ride the llama!
    • Music List
Re:Sansom Phantom Power Adapter Q
« Reply #3 on: April 05, 2004, 01:41:37 PM »
Both ends are male.  Input is mini xlr and output is standars xlr.
Logged
http://db.etree.org/lds490
Open: Studio Projects C-1s-> Mic2496 -> PDAudio-CF (IPAQ 5555) -> Addonics Pocket EX
Stealth: AT 831 -> Mic2496 -> PDAudio-CF (IPAQ 5555) -> IBM Microdrive

Offline Sean Gallemore

  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 8,036
Re:Sansom Phantom Power Adapter Q
« Reply #4 on: April 05, 2004, 01:44:21 PM »
it would be whatever fits on the mic-in of a pre, so male it is
Logged

Offline blu666z

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 3,189
  • AT ES943(H/C/O caps) » JKLab PP9 Pre » wmod UA-5
Re:Sansom Phantom Power Adapter Q
« Reply #5 on: April 05, 2004, 02:04:43 PM »
Quote from: Schwillster on April 05, 2004, 01:44:21 PM
it would be whatever fits on the mic-in of a pre, so male it is

Cool...just wanted to make sure since the input seemed backwards.  Out from mics is normally male but the input on the adapters is male also.

-Kevin
Logged
Pages: Pages1   Go Up
Previous topic - Next topic
 

RSS | Mobile
Page created in 0.079 seconds with 29 queries.
© 2002-2026 Taperssection.com
Powered by SMF