Become a Site Supporter and Never see Ads again!
Previous topic - Next topic
Pages: Pages1   Go Down

Author Topic: 9V Portable Delay  (Read 7,227 times)

0 Members and 3 Guests are viewing this topic.

Offline capnhook

  • All your llamas are belong to us....
  • Site Supporter
  • Trade Count: (20)
  • Needs to get out more...
  • *
  • Posts: 5,452
  • All your llamas are belong to us....
9V Portable Delay
« on: November 09, 2014, 05:06:15 PM »
Does anyone know or use a portable delay?  I have on occasion been asked to patch audio from my r-44, thus I would like to combine my unbalanced outputs through a delay, to make a live matrix.

Presently I can only send the AUD pair.  I would have to delay the SBD signal to matrix live.

Probably looking for something that would delay 0-100ms..?

Any such animal in the frontier?
Logged
Proud member of the reality-based community

BSCS-L->JB-mod [NAK CM-300 (CP-3) and/or (CP-1)]->LSD2->CA CAFS-Omni->Sony ECM-907**Apogee MiniMe Rev. C->CA Ugly II->**Edirol OCM R-44->Tascam DR-22WL->Sony TCD-D8


"Don't ever take an all or nothing attitude when it comes to making a difference
and being beautiful and making the world a beautiful place through your actions.
Every little bit is registered.  Every little bit.  So be as beautiful as you can as often as you can"

"It'll never be over, 'till we learn."
 
"My dream is to get a bus and get the band and just go coast to coast. Just about everything else except music, is anti-musical.  That's it.  Music's the thing." - Jeb Puryear

Offline tim in jersey

  • Trade Count: (8)
  • Needs to get out more...
  • *****
  • Posts: 3,912
Re: 9V Portable Delay
« Reply #1 on: November 09, 2014, 05:19:19 PM »
First two items listed here might fit the bill for you:

http://www.bhphotovideo.com/c/buy/Broadcast-Processors/ci/15517/N/4289367207
Logged

Offline tim in jersey

  • Trade Count: (8)
  • Needs to get out more...
  • *****
  • Posts: 3,912
Re: 9V Portable Delay
« Reply #2 on: November 09, 2014, 05:42:43 PM »
Logged

Offline capnhook

  • All your llamas are belong to us....
  • Site Supporter
  • Trade Count: (20)
  • Needs to get out more...
  • *
  • Posts: 5,452
  • All your llamas are belong to us....
Re: 9V Portable Delay
« Reply #3 on: November 09, 2014, 07:01:15 PM »
Thanks, Tim.

The first two might be aok, but I read some peoples' reviews that complained about 50ms steps.

This one....

http://www.hallresearch.com/page/ad-340

...looks perfect.
Logged
Proud member of the reality-based community

BSCS-L->JB-mod [NAK CM-300 (CP-3) and/or (CP-1)]->LSD2->CA CAFS-Omni->Sony ECM-907**Apogee MiniMe Rev. C->CA Ugly II->**Edirol OCM R-44->Tascam DR-22WL->Sony TCD-D8


"Don't ever take an all or nothing attitude when it comes to making a difference
and being beautiful and making the world a beautiful place through your actions.
Every little bit is registered.  Every little bit.  So be as beautiful as you can as often as you can"

"It'll never be over, 'till we learn."
 
"My dream is to get a bus and get the band and just go coast to coast. Just about everything else except music, is anti-musical.  That's it.  Music's the thing." - Jeb Puryear

Offline ScoobieKW

  • Trade Count: (3)
  • Taperssection All-Star
  • ****
  • Posts: 1,664
    • ScoobieSnax Audio Archive
Re: 9V Portable Delay
« Reply #4 on: November 09, 2014, 07:05:47 PM »
With size and cost of modern multitrack, why?

Unless you are doing a live mix for broadcast, capture tracks isolated and mix with the luxury of undo.
Logged
Busman BSC1, AT853 (O,C),KAM i2 Chuck Mod (C), Nak 300 (C),
M10, UA-5, US-1800, Presonus Firepod

http://kennedy-williams.net/scoobiesnax/

Offline capnhook

  • All your llamas are belong to us....
  • Site Supporter
  • Trade Count: (20)
  • Needs to get out more...
  • *
  • Posts: 5,452
  • All your llamas are belong to us....
Re: 9V Portable Delay
« Reply #5 on: November 09, 2014, 07:18:56 PM »
ScobieKW, yes I would be doing a live matrix for a webcast, out of my r-44.  I'll be using the RCA outs for source.

Now I gotta find a 4 > 2 channel mixer, and I will be set.

Thanks again, Tim.  Wish the AD-340 was half as cheap..
« Last Edit: November 10, 2014, 12:50:11 AM by capnhook »
Logged
Proud member of the reality-based community

BSCS-L->JB-mod [NAK CM-300 (CP-3) and/or (CP-1)]->LSD2->CA CAFS-Omni->Sony ECM-907**Apogee MiniMe Rev. C->CA Ugly II->**Edirol OCM R-44->Tascam DR-22WL->Sony TCD-D8


"Don't ever take an all or nothing attitude when it comes to making a difference
and being beautiful and making the world a beautiful place through your actions.
Every little bit is registered.  Every little bit.  So be as beautiful as you can as often as you can"

"It'll never be over, 'till we learn."
 
"My dream is to get a bus and get the band and just go coast to coast. Just about everything else except music, is anti-musical.  That's it.  Music's the thing." - Jeb Puryear

Offline ScoobieKW

  • Trade Count: (3)
  • Taperssection All-Star
  • ****
  • Posts: 1,664
    • ScoobieSnax Audio Archive
Re: 9V Portable Delay
« Reply #6 on: November 09, 2014, 07:21:18 PM »
Tascam 60D or 70D

4 track record, delay compensation for two tracks, 2 track mixer out.

All in one unit, probably cheaper than separate pieces.
Logged
Busman BSC1, AT853 (O,C),KAM i2 Chuck Mod (C), Nak 300 (C),
M10, UA-5, US-1800, Presonus Firepod

http://kennedy-williams.net/scoobiesnax/

Offline capnhook

  • All your llamas are belong to us....
  • Site Supporter
  • Trade Count: (20)
  • Needs to get out more...
  • *
  • Posts: 5,452
  • All your llamas are belong to us....
Re: 9V Portable Delay
« Reply #7 on: November 09, 2014, 07:22:44 PM »
Nah, I have 2 r-44's, that's enough for me.
Logged
Proud member of the reality-based community

BSCS-L->JB-mod [NAK CM-300 (CP-3) and/or (CP-1)]->LSD2->CA CAFS-Omni->Sony ECM-907**Apogee MiniMe Rev. C->CA Ugly II->**Edirol OCM R-44->Tascam DR-22WL->Sony TCD-D8


"Don't ever take an all or nothing attitude when it comes to making a difference
and being beautiful and making the world a beautiful place through your actions.
Every little bit is registered.  Every little bit.  So be as beautiful as you can as often as you can"

"It'll never be over, 'till we learn."
 
"My dream is to get a bus and get the band and just go coast to coast. Just about everything else except music, is anti-musical.  That's it.  Music's the thing." - Jeb Puryear

Offline tim in jersey

  • Trade Count: (8)
  • Needs to get out more...
  • *****
  • Posts: 3,912
Re: 9V Portable Delay
« Reply #8 on: November 09, 2014, 08:03:02 PM »
No problemo.
Logged

Offline cybergaloot

  • Trade Count: (7)
  • Needs to get out more...
  • *****
  • Posts: 4,087
  • Poohbah!
Re: 9V Portable Delay
« Reply #9 on: November 10, 2014, 10:55:19 AM »
You would need two of them but the Berhinger (yeah, I know) Shark (>$100 ea) would do it and they actually get decent reviews. Takes AC though. The one you found looks good for battery powered.
Logged
--
Walter

Everybody is ignorant, only on different subjects. Will Rogers

this>that>the other

kirk97132

  • Guest
  • Trade Count: (0)
Re: 9V Portable Delay
« Reply #10 on: November 10, 2014, 11:08:01 AM »
I didn't look at any of the links but you should confirm that it is not like an effects delay which is like a repeating echo that you control the amount of time between the echos.  IE: if is set the time on the delay unit at a soundboard for 50ms then each echo is 50ms apart.  It does not just move the signal 50ms. 
Logged

Offline capnhook

  • All your llamas are belong to us....
  • Site Supporter
  • Trade Count: (20)
  • Needs to get out more...
  • *
  • Posts: 5,452
  • All your llamas are belong to us....
Re: 9V Portable Delay
« Reply #11 on: November 10, 2014, 02:25:55 PM »
Quote from: cybergaloot on November 10, 2014, 10:55:19 AM
You would need two of them but the Berhinger (yeah, I know) Shark (>$100 ea) would do it and they actually get decent reviews. Takes AC though. The one you found looks good for battery powered.

Yeah, I could get a cable made to power it from my wallyworld Li's.

The AD-340 unit delays two channels, which is all I need to do.  I checked, it is not a echo unit.

I think a friend of mine used one of these "back in the day"...

Link to the manual:

http://hallresearch.com/files/manuals/AD-340.pdf

This should work fine....I'll get one, and try it out.

Thanks guys.
« Last Edit: November 10, 2014, 02:30:32 PM by capnhook »
Logged
Proud member of the reality-based community

BSCS-L->JB-mod [NAK CM-300 (CP-3) and/or (CP-1)]->LSD2->CA CAFS-Omni->Sony ECM-907**Apogee MiniMe Rev. C->CA Ugly II->**Edirol OCM R-44->Tascam DR-22WL->Sony TCD-D8


"Don't ever take an all or nothing attitude when it comes to making a difference
and being beautiful and making the world a beautiful place through your actions.
Every little bit is registered.  Every little bit.  So be as beautiful as you can as often as you can"

"It'll never be over, 'till we learn."
 
"My dream is to get a bus and get the band and just go coast to coast. Just about everything else except music, is anti-musical.  That's it.  Music's the thing." - Jeb Puryear
Pages: Pages1   Go Up
Previous topic - Next topic
 

RSS | Mobile
Page created in 0.14 seconds with 35 queries.
© 2002-2026 Taperssection.com
Powered by SMF