Become a Site Supporter and Never see Ads again!
Previous topic - Next topic
Pages: Pages1   Go Down

Author Topic: talentcell locking connector/rocker bypass mod  (Read 14,006 times)

0 Members and 1 Guest are viewing this topic.

Offline jerryfreak

  • No PZ
  • Trade Count: (31)
  • Needs to get out more...
  • *
  • Posts: 6,195
  • The plural of anecdote is not data
talentcell locking connector/rocker bypass mod
« on: June 16, 2019, 08:07:02 PM »
Logged
Unable to post or PM due to arbitrary censorship of people the mod doesn't like. Please email me using the link in my profile if you need to connect

Offline adrianf74

  • Trade Count: (15)
  • Taperssection Member
  • ***
  • Posts: 887
Re: talentcell locking connector/rocker bypass mod
« Reply #1 on: June 18, 2019, 03:34:52 PM »
Quote from: jerryfreak on June 16, 2019, 08:07:02 PM
i thought this was clever. save your ass.

https://wavreport.com/2017/11/29/batteries-part-2-diy-modding-the-talentcell-12v-lithium-battery/

Thanks for the share.  My buddy (who just upgraded from old DVD batteries that were way past their prime) and I were talking about this exact situation.  I'm not comfortable with doing the soldering but know some people where I work who might be able to help out.
Logged
Mics: Neumann KK 184 capsules with nBob Actives and Naiant PFAs | Recorders: Zoom F6 and Zoom F3 w/ BTA-1 plus Sony PCM-A10 | Power: RiotBox, Neewer NP-F750 7000mAh | Video Camera: DJI Osmo Action 4

Offline adrianf74

  • Trade Count: (15)
  • Taperssection Member
  • ***
  • Posts: 887
Re: talentcell locking connector/rocker bypass mod
« Reply #2 on: June 18, 2019, 10:39:58 PM »
Read further down in the comments and in later 2018, people were stating the clearance is no longer there near the usb "port." Guess I'll need to open mine up to look.
Logged
Mics: Neumann KK 184 capsules with nBob Actives and Naiant PFAs | Recorders: Zoom F6 and Zoom F3 w/ BTA-1 plus Sony PCM-A10 | Power: RiotBox, Neewer NP-F750 7000mAh | Video Camera: DJI Osmo Action 4

Offline rippleish20

  • Trade Count: (24)
  • Taperssection All-Star
  • ****
  • Posts: 1,022
Re: talentcell locking connector/rocker bypass mod
« Reply #3 on: June 19, 2019, 07:58:41 AM »
I did this hack to one of mine but I put the connector out the side of the case. It was too tight a fit doing the way its shown
Logged
AKG C480B (ck61, ck63, ck8) /  Neumann KM100 (AK40, AK50) / AT853s  (cardiod, omni) / CA-14 (cardiod) / CA-11 (Omni) / Mixpre-10t / Mixpre-6 / Roland R-07 / Zoom F-3
paypal: rippleish20@gmail.com

Offline EmRR

  • Trade Count: (5)
  • Taperssection Member
  • ***
  • Posts: 890
    • ElectroMagnetic Radiation Recorders
Re: talentcell locking connector/rocker bypass mod
« Reply #4 on: June 19, 2019, 10:00:57 AM »
That's my comment at the bottom about the new PCB and what looks possible.  Haven't done it to mine, but looks pretty easy. 
Logged
Mics: DPA 4060 w/MPS 6030 PSU/DAD6001/DAD4099, Neumann KM 131, Oktava MK 012, Sennheiser MKH 105, MKH 20, MKH 30, MKH 40, MKH 800 TWIN, Rode NT-FS1.
Recorders: Zoom F8n, Sony MZ-R50
Pages: Pages1   Go Up
Previous topic - Next topic
 

RSS | Mobile
Page created in 0.086 seconds with 31 queries.
© 2002-2026 Taperssection.com
Powered by SMF