ISO Clamp Suggestions

[mbogigian]

I'm looking for suggestions for clamps to use at shows. Whether it be clamping to a rail or another mic stand. I have akg blue lines w the t bar. Links are appreciated and if anyone happens to have any for sale please PM me. Thanks for the help!

[voltronic]

I'm looking for suggestions for clamps to use at shows. Whether it be clamping to a rail or another mic stand. I have akg blue lines w the t bar. Links are appreciated and if anyone happens to have any for sale please PM me. Thanks for the help!

Look no further than the 9.Solutions clamps, especially the Savior Clamp With Socket. You will never use a Super Clamp again after trying one of these. My full review here:

https://taperssection.com/index.php?topic=193520

[aaronji]

For stand clamping, I would recommend finding a smaller clamp. By the time you add a pound of clamp, plus bar/mounts/mics, to a stand it can get pretty top-heavy and sway quite a bit. Less weight also means you don't have to tighten it down so hard that you might damage the (typically) aluminum, narrow top section of the stand. 

[fireonshakedwnstreet]

I recommend the Windtech C clamp for clamping on stands. I have it permanently attached to my stand. Holds short shotguns with no problem.

https://www.bhphotovideo.com/c/product/298908-REG/WindTech_MPC_10_Multi_Position_C_Type_Clamp.html/?ap=y&gclid=CjwKCAiA5Y6eBhAbEiwA_2ZWIZ7XDWt38aLAPC8CZQDz7uLT2SWxgmk4feejQ7IhWN5IuSBw4YC4YhoCYMEQAvD_BwE&lsft=BI%3A514&smp=y

[mbogigian]

Awesome thanks

[rocksuitcase]

To the OP, both of these are excellent solutions. the Savior clamp (or Super Clamp whichever you choose) for rails, chair rails, tabletops etc. the Windtech C clamp is the go-to for smaller, clamp to your own or others' stand solution. e.g I own three Windtechs and one superclamp with stud.  Good luck!

[voltronic]

If you click the first link in my post, you'll see that 9.Solutions has a mini version of the Savior - only 135 g.

[mbogigian]

I'm looking for suggestions for clamps to use at shows. Whether it be clamping to a rail or another mic stand. I have akg blue lines w the t bar. Links are appreciated and if anyone happens to have any for sale please PM me. Thanks for the help!

Look no further than the 9.Solutions clamps, especially the Savior Clamp With Socket. You will never use a Super Clamp again after trying one of these. My full review here:

https://taperssection.com/index.php?topic=193520

What te the prices for this clamp? I don't see any or links for where to buy. Thanks

[vanark]

What te the prices for this clamp? I don't see any or links for where to buy. Thanks

Looks to be $45 on B&H

https://www.bhphotovideo.com/c/product/1426914-REG/9_solutions_9_xs1005b_savior_clamp_with_socket.html

I didn't look anywhere else

[mrfender]

What te the prices for this clamp? I don't see any or links for where to buy. Thanks

Looks to be $45 on B&H

https://www.bhphotovideo.com/c/product/1426914-REG/9_solutions_9_xs1005b_savior_clamp_with_socket.html

I didn't look anywhere else

$39 on Amazon.

[SMsound]

If you click the first link in my post, you'll see that 9.Solutions has a mini version of the Savior - only 135 g.

^^ This is important. I have a ton of clamps, and it's often difficult to find a happy medium between the excellent, rock solid, heavy (450g or about 1lb) manfrotto super clamp, and lightweight little clamps.

Also, pay attention to how your t-bar attaches to the clamp. Many clamps only accept one 3/8" or 1/4" threaded stud, which is not always ideal (it can twist and come loose, so it won't fall off but your mics will be pointed the wrong way in that case)

I like the Manfrotto 386b nano clamp, it does have the twist issue unless you use the manfrotto quick connect or something with it. Voltronic's mini clamp looks good, too.

[jbell]

Rowi 76 is the most used clamp I have!  Doesn't work in all situation, but it is bomber for stand clamping or small rails.  You would have to find one used on Ebay, but if you keep and eye out it isn't hard to find one for a good price.