Become a Site Supporter and Never see Ads again!
« previous next »
Pages: [1]   Go Down

Author Topic: DPA 4061 with a 3-pin LEMO  (Read 6506 times)

0 Members and 1 Guest are viewing this topic.

Offline one8ung

  • Trade Count: (5)
  • Taperssection Member
  • ***
  • Posts: 348
  • Gender: Male
DPA 4061 with a 3-pin LEMO
« on: July 26, 2024, 02:55:33 PM »
Does the DPA 4061 microphone with a 3-pin LEMO connector 3 or 2 wires?
Logged
Mics: DPA 4061, Schoeps CCM 41

Power: CA-UBB, Custom made battery box

Recorders: Deity PR-2, Tascam DR-2d (3x), ZOOM F3 w/ BTA-1

Field mixer, interface: Teenage Engineering TX-6, RØDE AI-Micro (2x)

IEM Receivers: Sennheiser EK 2000 IEM-Aw, Sennheiser EK 2000 IEM-Bw, Sennheiser EK 2000 IEM-GBw, Sennheiser EK 2000 IEM-Gw, Shure P10R G10, Shure P10R J8, Shure P10R L8, Wisycom MPR50-IEM

Offline Gutbucket

  • record > listen > revise technique
  • Trade Count: (16)
  • Needs to get out more...
  • *****
  • Posts: 16727
  • Gender: Male
  • We create auditory illusions, not reproductions
Re: DPA 4061 with a 3-pin LEMO
« Reply #1 on: July 26, 2024, 03:02:53 PM »
Its only two-wire to the microphone past the connector.  How the 3-pin connector is wired depends on what it was intended to be used with.  Might have one pin bridged to one of the other two or simply unconnected.
Logged
musical volition > vibrations > voltages > numeric values > voltages > vibrations> virtual teleportation time-machine experience
Better recording made easy - >>Improved PAS table<< | Made excellent- >>click here to for the Oddball Microphone Technique illustrated PDF booklet<< (note: Version 4 provided in individual sections rather than a single booklet)

Offline one8ung

  • Trade Count: (5)
  • Taperssection Member
  • ***
  • Posts: 348
  • Gender: Male
Re: DPA 4061 with a 3-pin LEMO
« Reply #2 on: July 26, 2024, 09:04:43 PM »
Thank you, that's exactly what I was suspected
Logged
Mics: DPA 4061, Schoeps CCM 41

Power: CA-UBB, Custom made battery box

Recorders: Deity PR-2, Tascam DR-2d (3x), ZOOM F3 w/ BTA-1

Field mixer, interface: Teenage Engineering TX-6, RØDE AI-Micro (2x)

IEM Receivers: Sennheiser EK 2000 IEM-Aw, Sennheiser EK 2000 IEM-Bw, Sennheiser EK 2000 IEM-GBw, Sennheiser EK 2000 IEM-Gw, Shure P10R G10, Shure P10R J8, Shure P10R L8, Wisycom MPR50-IEM
Pages: [1]   Go Up
« previous next »
 

RSS | Mobile
Page created in 0.028 seconds with 27 queries.
© 2002-2025 Taperssection.com
Powered by SMF