Become a Site Supporter and Never see Ads again!
« previous next »
Pages: [1]   Go Down

Author Topic: AT853 mounting options  (Read 4918 times)

0 Members and 3 Guests are viewing this topic.

Offline willndmb

  • Trade Count: (17)
  • Needs to get out more...
  • *****
  • Posts: 6822
  • Gender: Male
AT853 mounting options
« on: September 13, 2025, 05:52:19 PM »
Sorry if this was overlooked but searching many keywords here is hard since they are common

I am looking for a din bar or similar way to mount a pair of at853 should I want to run them on a stand with my AKG pairs.
My old SPro version were bigger than my ones now so the mounts I have don’t work.
TIA
Logged
Mics - AKG ck61/ck63 (c480b & Naiant actives), SP-BMC-2
XLR Cables - Silver Path w/Darktrain stubbies
Interconnect Cables - Dogstar (XLR), Darktrain (RCA > 1/8) (1/8 > 1/8), and Kind Kables (1/8f > 1/4)
Preamps - Naiant Littlebox & Tinybox
Recorders - PCM-M10 & DR-60D

Offline DaisyHillPuppyFarm

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 2
  • Gender: Male
Re: AT853 mounting options
« Reply #1 on: September 17, 2025, 11:09:28 AM »
I use one from SRSRecordings.
https://www.ebay.com/itm/135228012467
Logged

Offline willndmb

  • Trade Count: (17)
  • Needs to get out more...
  • *****
  • Posts: 6822
  • Gender: Male
Re: AT853 mounting options
« Reply #2 on: September 17, 2025, 08:06:54 PM »
Logged
Mics - AKG ck61/ck63 (c480b & Naiant actives), SP-BMC-2
XLR Cables - Silver Path w/Darktrain stubbies
Interconnect Cables - Dogstar (XLR), Darktrain (RCA > 1/8) (1/8 > 1/8), and Kind Kables (1/8f > 1/4)
Preamps - Naiant Littlebox & Tinybox
Recorders - PCM-M10 & DR-60D

Offline mrfender

  • Trade Count: (4)
  • Taperssection Member
  • ***
  • Posts: 585
Re: AT853 mounting options
« Reply #3 on: September 18, 2025, 08:11:11 AM »
Quote from: willndmb on September 17, 2025, 08:06:54 PM
Quote from: DaisyHillPuppyFarm on September 17, 2025, 11:09:28 AM
I use one from SRSRecordings.
https://www.ebay.com/itm/135228012467
sweet thanks, but $75 damn

They are but they're also very good quality.  It's not someone printing off some cheap thing in their garage (like me) that will break after a couple of uses.

Sounds like a commercial for him but I have three that I'm very happy with.
Logged
DR2d, DR-44wl, DR-608, PCM-M10, Roland R-07, PCM-A10, Zoom F3
CA-14 card/omni, AT853 cards/omni, Nak CM-300 cards, Line Audio CM4 & OM-1, Neumann KM-184

Offline willndmb

  • Trade Count: (17)
  • Needs to get out more...
  • *****
  • Posts: 6822
  • Gender: Male
Re: AT853 mounting options
« Reply #4 on: September 18, 2025, 12:17:36 PM »
Quote from: mrfender on September 18, 2025, 08:11:11 AM
Quote from: willndmb on September 17, 2025, 08:06:54 PM
Quote from: DaisyHillPuppyFarm on September 17, 2025, 11:09:28 AM
I use one from SRSRecordings.
https://www.ebay.com/itm/135228012467
sweet thanks, but $75 damn

They are but they're also very good quality.  It's not someone printing off some cheap thing in their garage (like me) that will break after a couple of uses.

Sounds like a commercial for him but I have three that I'm very happy with.
thanks
Logged
Mics - AKG ck61/ck63 (c480b & Naiant actives), SP-BMC-2
XLR Cables - Silver Path w/Darktrain stubbies
Interconnect Cables - Dogstar (XLR), Darktrain (RCA > 1/8) (1/8 > 1/8), and Kind Kables (1/8f > 1/4)
Preamps - Naiant Littlebox & Tinybox
Recorders - PCM-M10 & DR-60D
Pages: [1]   Go Up
« previous next »
 

RSS | Mobile
Page created in 0.04 seconds with 29 queries.
© 2002-2025 Taperssection.com
Powered by SMF