Become a Site Supporter and Never see Ads again!

Author Topic: ISO Full Range Speaker Advice  (Read 9083 times)

0 Members and 1 Guest are viewing this topic.

Offline Nick's Picks

  • Trade Count: (33)
  • Needs to get out more...
  • *****
  • Posts: 10270
  • Gender: Male
  • I thought I heard.......
Re: ISO Full Range Speaker Advice
« Reply #15 on: September 28, 2005, 04:48:16 PM »
you dont have to spend a ton for 20hz.
you just need to know what to look for...from 5-10 years ago.
:)

Offline cdevs

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 239
  • Gender: Male
  • I got a pork roll egg cheese & bacon
Re: ISO Full Range Speaker Advice
« Reply #16 on: September 29, 2005, 01:11:12 AM »
i've listened to the 2ce signitures a lot..and i'll take the vr2 over those any day


same here...but 2CEs can be had for $600 or so. They definitely need a big room and lotsa power to sound decent. But I've heard them sing nicely when conditions are right. At least they aren't bright. YMMV
Gefell MG300s> Bumblebees> Apogee Mini-MP> Edirol R-09hr

Offline Nick's Picks

  • Trade Count: (33)
  • Needs to get out more...
  • *****
  • Posts: 10270
  • Gender: Male
  • I thought I heard.......
Re: ISO Full Range Speaker Advice
« Reply #17 on: September 29, 2005, 08:20:23 AM »
you're right.  they are not bright.  Carl had a pair..they sounded great.  realy great.

Offline twoodruff

  • Trade Count: (91)
  • Needs to get out more...
  • *****
  • Posts: 4687
  • Gender: Male
Re: ISO Full Range Speaker Advice
« Reply #18 on: September 29, 2005, 08:46:02 AM »
Wish I could set you up with some Eggle's ;D
I found this on audiogon for Dynaudio Audience 8
http://cls.audiogon.com/cgi-bin/cls.pl?spkrfull&1132897613
I would guess these go down to the 30-40Hz range, I personally have never heard them, but we
do use Dynaudio Esostar tweeters for all our egglestonworks speakers, and Dynaudio woofers.
I do believe Dynaudio USA uses different drivers than we do, but I'm sure they are still quality.
Maybe someone can elaborate more on Dynaudio Sound.

Oh yea, Trey, nice tennis pictures in the VIP Jackson mag ;D


I ended up with these dynaudios, thanks for everyone's help
No Mics
Clamps
Cables
No Preamp
Recorders

Offline sygdwm

  • unknown sleath taper
  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 8747
  • Gender: Male
Re: ISO Full Range Speaker Advice
« Reply #19 on: September 29, 2005, 11:37:03 AM »
those look they might rock. let me know when they arrive.  >:D

-drew
mics: (4)akg c460b(a60,mk46,ck1x,ck1,ck2,ck3,ck61,ck63)
pres: oade m148/edirol wmod ua5
recorders: marantz stock671/oade acm671/fostex busman vintage fr2le

(P.S.: On a threaded discussion board like this one, there's no need to repeat someone's post when you reply to them; everyone can see all the messages in the thread.)

Offline jacallery

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 198
  • Gender: Male
Re: ISO Full Range Speaker Advice
« Reply #20 on: September 30, 2005, 10:51:59 AM »
Cool Trey I think you will Like them. 
Let me know when they come in.
schoeps mk41/mk5+cmc6xt>Nagra V (24/96)

Offline Mic D

  • Habitual Line Stepper
  • Trade Count: (19)
  • Taperssection All-Star
  • ****
  • Posts: 1999
  • Gender: Male
Re: ISO Full Range Speaker Advice
« Reply #21 on: September 30, 2005, 11:26:21 AM »
save up a few hundred more, and get the VR2s.
they go down to 25hz.  Plenty of low end.  a very dynamic speaker. 

and look at this even!  what timing.
http://cls.audiogon.com/cgi-bin/cls.pl?spkrfull&1131980430

Those are Mic D's (Kevin Durant). I've heard them and they sound great.

Let me know, Trey...

Offline carlbeck

  • Trade Count: (14)
  • Needs to get out more...
  • *****
  • Posts: 2811
  • Gender: Male
Re: ISO Full Range Speaker Advice
« Reply #22 on: September 30, 2005, 06:17:09 PM »
I like those Dynaudio's, I always wanted to try a pair. I have read good things about them, I am sure you will like them. If not you can always sell them & try something else.
I know you like, tape for people's approval and stuff, and wave your tapes around like they're your dick...  but even you can't actually think section tapes from philips sound good.  



Mics: Telefunken Elam 260, 61, 62, MBHO KA200, KA500 > Niant PFA's, AKG C34L-MS
Preamps: Grace Lunatec V2, Shure FP24
Decks: Tascam DR-2d, Zoom F8

Old rig: Recording: AKG C34 & AKG CK1X or CK2X > MK46 > 460 > Aeta Mix2000 > Sound Devices 702

Playback: Thorens TD125, Denon DVD-2900> Bel Canto DAC-1 > Audible Illusions 3B > Rogue Atlas >ZU Wax Shotgun> Hyperion 938
ALL TUBES BABY!!!

 

RSS | Mobile
Page created in 0.046 seconds with 32 queries.
© 2002-2024 Taperssection.com
Powered by SMF