Become a Site Supporter and Never see Ads again!
Previous topic - Next topic
Pages: Pages1   Go Down

Author Topic: question about dpa4061  (Read 4,844 times)

0 Members and 1 Guest are viewing this topic.

Offline BuddyGoodness

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 239
question about dpa4061
« on: October 28, 2005, 02:58:38 AM »
What would it cost to have the plugs of some dpa4061 changed from lemo connectors to a mini-plug.  What is a good person/place to have do it?
Logged

Offline Evil Taper

  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 2,773
  • Going pro...no time for taping now
Re: question about dpa4061
« Reply #1 on: October 28, 2005, 04:47:21 AM »
Gold 1/8" plugs are something like .85-1.00 at radio shack.  If you know anyone who is a competant and confident solderer they can do the job.  Any electronics repair shop should be able to do this job for pretty cheap if you don't know anyone.
Logged
Really not very evil at all now...

Offline bagtagsell

  • Trade Count: (0)
  • Taperssection All-Star
  • ****
  • Posts: 1,220
  • Man is condemned to be free- Sartre
Re: question about dpa4061
« Reply #2 on: October 29, 2005, 10:59:21 AM »
Logged
MG200/210>m148>v3>MT2496
                       
*aspiring gear slut of the month year*
"I am the gear slut goo goo g'joob g'goo goo g'joob"

Offline BuddyGoodness

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 239
Re: question about dpa4061
« Reply #3 on: October 30, 2005, 10:28:14 PM »
Thank.
Logged
Pages: Pages1   Go Up
Previous topic - Next topic
 

RSS | Mobile
Page created in 0.064 seconds with 27 queries.
© 2002-2026 Taperssection.com
Powered by SMF