Become a Site Supporter and Never see Ads again!

Author Topic: MT track time?  (Read 2070 times)

0 Members and 1 Guest are viewing this topic.

napa

  • Guest
  • Trade Count: (0)
MT track time?
« on: July 06, 2006, 08:14:47 AM »
Ok, when I'm recording in 24 bit, the MT it gives you Media time and Track time. When it comes to track time, when that time is up, does the MT seamlessly go to the next track or save and then load a new file? Basicly does do you lose any audio in that time?

Offline coloartist

  • Trade Count: (13)
  • Needs to get out more...
  • *****
  • Posts: 2067
  • MGoldey -"you can shove those mics up your ass
Re: MT track time?
« Reply #1 on: July 06, 2006, 10:21:29 AM »
It leaves a 3-5 second gap, with the latest firmware. I start a new file during a song break when this is going to happen.

It saves and starts a new file.

I can't remember which firmware started this. I think it 1.3.3.

Before that it was totally manual.
mk4>Kwon/din a/din>kc5>cmc6>kindkables XLR>788T
mk22>Kwon/NOS>kc5>cmc6>kindkablesXLR>788t                                                     
Canon XH-A1 Sony AX100                       
Samsung Backlit LED 55">Pioneer Elite SC-27>Snell Acoustics E.5  Series

napa

  • Guest
  • Trade Count: (0)
Re: MT track time?
« Reply #2 on: July 06, 2006, 10:37:11 AM »
It leaves a 3-5 second gap, with the latest firmware. I start a new file during a song break when this is going to happen.

It saves and starts a new file.

I can't remember which firmware started this. I think it 1.3.3.

Before that it was totally manual.

So it will leave a gap.. Sucks..

Offline udovdh

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 986
Re: MT track time?
« Reply #3 on: July 06, 2006, 10:43:55 AM »
So it will leave a gap.. Sucks..
Indeed. Also 2GB is 2.000.000.000 bytes according to M-Audio's developers.
The 2GB bugs have been widely communicated to M-Audio but some wake-up emails with the bugs explained could help?
(the 2GB gap-bug is OLD... This one really needs a fix.)

napa

  • Guest
  • Trade Count: (0)
Re: MT track time?
« Reply #4 on: July 06, 2006, 11:46:50 AM »
So if I just let run out it put a 3-5 gap and also restart a file with 1.333 whatever it is firmware. Or of course do it manuel.

Offline coloartist

  • Trade Count: (13)
  • Needs to get out more...
  • *****
  • Posts: 2067
  • MGoldey -"you can shove those mics up your ass
Re: MT track time?
« Reply #5 on: July 06, 2006, 12:37:59 PM »
Correct- I do it manually.
mk4>Kwon/din a/din>kc5>cmc6>kindkables XLR>788T
mk22>Kwon/NOS>kc5>cmc6>kindkablesXLR>788t                                                     
Canon XH-A1 Sony AX100                       
Samsung Backlit LED 55">Pioneer Elite SC-27>Snell Acoustics E.5  Series

 

RSS | Mobile
Page created in 0.041 seconds with 30 queries.
© 2002-2024 Taperssection.com
Powered by SMF