Become a Site Supporter and Never see Ads again!

Author Topic: opinions wanted on recording  (Read 1385 times)

0 Members and 1 Guest are viewing this topic.

Offline heyitsmejess

  • Trade Count: (2)
  • Taperssection All-Star
  • ****
  • Posts: 1208
  • Gender: Male
opinions wanted on recording
« on: October 24, 2007, 11:41:23 AM »
here are the samples...

http://www.sendspace.com/file/1nfe6r
sample 1

http://www.sendspace.com/file/3grw11
sample 2

i guess what im looking for is opinons on the recording itself.

levels too high?  mics too high?

there were recorded with CA ST-11>CA9100 mics on stand 10" high.  venue was a large wooden box (bogarts, cincinnati ohio) with about 600 people.

any and all opinions wanted....just starting out and am looking for feedback.

thanks!
cause we zig and zag between good and bad
stumble and fall on right and wrong


http://www.rumpkemountainboys.org/

Offline Javier Cinakowski

  • !! Downhill From Here !!
  • Trade Count: (11)
  • Needs to get out more...
  • *****
  • Posts: 4325
  • Gender: Male
Re: opinions wanted on recording
« Reply #1 on: October 24, 2007, 12:45:06 PM »
Sound fine.  Just like I would expect from the equipment you are using.  10" might be a little high.  I think the bass might have been better if the stand was lower.
Neumann KM185mp OR DPA ST2015-> Grace Design Lunatec V2-> Tascam DR-100mkIII

Offline Belexes

  • Trade Count: (10)
  • Needs to get out more...
  • *****
  • Posts: 5223
  • Gender: Male
Re: opinions wanted on recording
« Reply #2 on: October 24, 2007, 01:56:21 PM »
The higher you go the "thinner" the sound gets on an indoor venue.  It can be a challenge to get good bass response from "stealth" mics, but your capture is along as good as the FOH mix.
Busman Audio BSC1-K1/K2/K3/K4 > HiHo Silver XLR's > Deck TBD

CA-14 (c,o)/MM-HLSC-1 (4.7k mod)/AT853(4.7k mod)(c,o,h,sc)/CAFS (o)/CA-1 (o) > CA-9100 (V. 4.1)/CA-9200/CA-UBB > Sony PCM-D50/Sony PCM-M10

 

RSS | Mobile
Page created in 0.04 seconds with 32 queries.
© 2002-2024 Taperssection.com
Powered by SMF