Topic: Studio Projects C4 settings

[darktrain]

Hey, i picked up a set of C4's and these are the older version with one switch, it is marked with a -10bd and 2 other lines, what do the 2 other lines represent? can't seem to locate an original manual, just the new version which has 2 switches. Just when i nailed down all the stealth stuff i feel like a noob again.

[rowjimmytour]

switchable -10dB pad
high pass filter
linear low-noise

[darktrain]

so what which is standard setting for "most" shows

----    up

_---   middle


-10  down

[rowjimmytour]

I didn't want to answer this right away because its been a while and I could not find the thread where I asked the same ? but I believe 99.9% it all the way up.
peace

[Belexes]

I have these and run them in the "up" position as did the TS'er that I bought them from.

[JoeKiller]

I always run mine in the up position because I could always go back and digitally run a HPF.  Try different setups, DIN, ORTF, or XY to play and see which results you like the best.

[612]

up/top position for me as well.

[cgrooves]

I run mine all the way up as well.

Emptyzero-
If you ever ran the rig in your sig with a digi mod UA5 (prior to the busman mod), please shoot me a PM.

[rowjimmytour]

I run mine all the way up as well.

Emptyzero-
If you ever ran the rig in your sig with a digi mod UA5 (prior to the busman mod), please shoot me a PM.

I ran my UA5 digi mod only for a couple years before I had busman mod it w/ busman2+. Check my bookmarks for shows if you want to hear the difference. The one thing I liked the msot about the mod was how hot I could run my UA5 w/o clipping and of course the clarity.
Peace

[cgrooves]

I run mine all the way up as well.

Emptyzero-
If you ever ran the rig in your sig with a digi mod UA5 (prior to the busman mod), please shoot me a PM.

I ran my UA5 digi mod only for a couple years before I had busman mod it w/ busman2+. Check my bookmarks for shows if you want to hear the difference. The one thing I liked the msot about the mod was how hot I could run my UA5 w/o clipping and of course the clarity.
Peace

Thanks, I'll check them out.
+T