Become a Site Supporter and Never see Ads again!
« previous next »
Pages: [1]   Go Down

Author Topic: Is the iRiver iHP-100 [10gb] considered the H110? And Where to put rubber thing?  (Read 2873 times)

0 Members and 1 Guest are viewing this topic.

Offline Neilyboy

  • Trade Count: (14)
  • Taperssection Member
  • ***
  • Posts: 917
  • Gender: Male
Is the iRiver iHP-100 [10gb] considered the H110? And Where to put rubber thing?
« on: August 10, 2009, 08:07:04 PM »
Hey there, I just picked up a used iRiver from YS. I just rockboxed it and threw on the new V7-pre4 bootloader (as I have ordered my cf card today for the mod). I have been playing around with it (was told the battery held a good charge) but I can tell just from doing a 5min recording that this is false. I am looking to purchase a new battery and wondered if this is the correct battery.

http://cgi.ebay.com/Replacement-for-iRiver-H110-Battery-2200mAh_W0QQitemZ350057234397

Also while taking it apart this rubber thing fell out and I have no idea where it goes.. any help would be much appreciated.



other than that I think I got it all figured out!

Thanks so much

Neil
« Last Edit: August 10, 2009, 08:45:42 PM by Neilyboy »
Logged
Mic's: AKG C214's, Line Audio CM3, AT4041SP, AT853 (C, SC, O), AT943 (C, H)
Pre's: Sound Devices MixPre 2
Rec's: Sony PCM-M10, Edirol R-44, Tascam DR60D MKii, Tascam DR70D x 2

Offline darktrain

  • Trade Count: (715)
  • Needs to get out more...
  • *****
  • Posts: 2875
  • Gender: Male
  • Whats next?
Re: Is the iRiver iHP-100 [10gb] considered the H110? And Where to put rubber thing?
« Reply #1 on: August 10, 2009, 10:23:29 PM »
Quote from: Neilyboy on August 10, 2009, 08:07:04 PM
Hey there, I just picked up a used iRiver from YS. I just rockboxed it and threw on the new V7-pre4 bootloader (as I have ordered my cf card today for the mod). I have been playing around with it (was told the battery held a good charge) but I can tell just from doing a 5min recording that this is false. I am looking to purchase a new battery and wondered if this is the correct battery.

http://cgi.ebay.com/Replacement-for-iRiver-H110-Battery-2200mAh_W0QQitemZ350057234397

Also while taking it apart this rubber thing fell out and I have no idea where it goes.. any help would be much appreciated.



other than that I think I got it all figured out!

Thanks so much

Neil

it sits right at the end of the board opposite the hd fitting, it will fit around some of the circuits
Logged

Offline Neilyboy

  • Trade Count: (14)
  • Taperssection Member
  • ***
  • Posts: 917
  • Gender: Male
Re: Is the iRiver iHP-100 [10gb] considered the H110? And Where to put rubber thing?
« Reply #2 on: August 10, 2009, 11:41:08 PM »
Thanks a bunch Robb I will keep playing with it.. I figured it went down by the optical/in-out but I can not figure out how it fits in there for the life of me hahaha..

BTW... I used the cables you sent me this last weekend! I LOVE them. Yeah they are a little stiff but ya know what it makes for a clean bag!

Take care man!
Neil
Logged
Mic's: AKG C214's, Line Audio CM3, AT4041SP, AT853 (C, SC, O), AT943 (C, H)
Pre's: Sound Devices MixPre 2
Rec's: Sony PCM-M10, Edirol R-44, Tascam DR60D MKii, Tascam DR70D x 2

Offline Neilyboy

  • Trade Count: (14)
  • Taperssection Member
  • ***
  • Posts: 917
  • Gender: Male
Re: Is the iRiver iHP-100 [10gb] considered the H110? And Where to put rubber thing?
« Reply #3 on: August 10, 2009, 11:45:59 PM »
I feel really dumb.. anyone have a picture?

Neil
Logged
Mic's: AKG C214's, Line Audio CM3, AT4041SP, AT853 (C, SC, O), AT943 (C, H)
Pre's: Sound Devices MixPre 2
Rec's: Sony PCM-M10, Edirol R-44, Tascam DR60D MKii, Tascam DR70D x 2

Offline petur

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 544
  • Gender: Male
  • wtb: time
Re: Is the iRiver iHP-100 [10gb] considered the H110? And Where to put rubber thing?
« Reply #4 on: August 11, 2009, 07:54:26 AM »
the battery should be a good one (it's a CameronSino)
Logged

Offline Neilyboy

  • Trade Count: (14)
  • Taperssection Member
  • ***
  • Posts: 917
  • Gender: Male
Re: Is the iRiver iHP-100 [10gb] considered the H110? And Where to put rubber th
« Reply #5 on: August 11, 2009, 07:57:40 AM »
Yeah I have bought from this seller before. I bought a similar battery (the same?) for my H320 about 3 months back when I preformed the same mod on it. Now the only problem is I still can not get that goofy piece of rubber to 'fit' in anywhere when putting it back together. I have looked online and can not for the life of me find a picture of the insides of a h1xx that help with placement of that piece!

Neil
Logged
Mic's: AKG C214's, Line Audio CM3, AT4041SP, AT853 (C, SC, O), AT943 (C, H)
Pre's: Sound Devices MixPre 2
Rec's: Sony PCM-M10, Edirol R-44, Tascam DR60D MKii, Tascam DR70D x 2

Offline Neilyboy

  • Trade Count: (14)
  • Taperssection Member
  • ***
  • Posts: 917
  • Gender: Male
Re: Is the iRiver iHP-100 [10gb] considered the H110? And Where to put rubber th
« Reply #6 on: August 11, 2009, 08:14:59 AM »
Hey, I feel dumb I looked at this picture like 3 times before I saw where the rubber thing goes.. I figured it would fit in like a puzzle piece.. so I am just putting it here for future reference.



Neil
Logged
Mic's: AKG C214's, Line Audio CM3, AT4041SP, AT853 (C, SC, O), AT943 (C, H)
Pre's: Sound Devices MixPre 2
Rec's: Sony PCM-M10, Edirol R-44, Tascam DR60D MKii, Tascam DR70D x 2
Pages: [1]   Go Up
« previous next »
 

RSS | Mobile
Page created in 0.107 seconds with 36 queries.
© 2002-2024 Taperssection.com
Powered by SMF