Become a Site Supporter and Never see Ads again!

Author Topic: Need Input On The Quality Of This Recording  (Read 2985 times)

0 Members and 1 Guest are viewing this topic.

Offline Cheesecadet

  • Trade Count: (21)
  • Needs to get out more...
  • *****
  • Posts: 3024
  • Gender: Male
  • http://db.etree.org/cheesecadet
Need Input On The Quality Of This Recording
« on: July 02, 2009, 07:14:00 PM »
Just curious about some input on the quality of this recording?  The only editing performed was a + 0.5dB boost to the levels...barely anything.  I think it sounds good but would like to get some other feedback if you can spare the time.

It was recorded in a small bar with low ceilings...I was about 12 feet from the stage, seated, center

http://www.sendspace.com/file/nw1dfm

Thanks in advance!  ;D
AKG 481's > Hi H0s > MixPre-3 |  4061's (Matched) > Tinybox v1.5 > PCM-A10 |  AT933's w/ AT853-ELE's (SC/C/O)

Vinyl:
Fluance RT83 Reference > MCS 3230 Receiver > Realistic MC-500's (NOS)

Upcoming:
01/23 Phil Hanley - Comedy Works
01/30 Michael Blaustein - Comedy Works
02/08 ManyColors: J. Dilla Tribute - Dazzle
04/03 Bill Frisell - Gates Hall
04/24 Dead & Co. - Sphere
06/18 FirstGrass
06/19 TBF
06/20 TBF

Offline habit

  • Trade Count: (14)
  • Taperssection Member
  • ***
  • Posts: 366
  • Gender: Male
    • My Archive Shows
Re: Need Input On The Quality Of This Recording
« Reply #1 on: July 02, 2009, 07:30:54 PM »
Sounds pretty solid to me. What are you hearing that has you asking?
Busman Mod R4 Pro | Schoeps M222 | Schoeps MK4 & 41

Offline Cheesecadet

  • Trade Count: (21)
  • Needs to get out more...
  • *****
  • Posts: 3024
  • Gender: Male
  • http://db.etree.org/cheesecadet
Re: Need Input On The Quality Of This Recording
« Reply #2 on: July 02, 2009, 07:34:26 PM »
Nothing in particular.  It was the first time I ran this setup and just was curious what others thought.  I know opinions vary...but It is nice to get input from others just to validate what I was thinking.  I have run cards mainly in the past with a few omni shows...but this was the first show with these particular omnis.

Thanks for the feedback!

Would love to get more from others...
AKG 481's > Hi H0s > MixPre-3 |  4061's (Matched) > Tinybox v1.5 > PCM-A10 |  AT933's w/ AT853-ELE's (SC/C/O)

Vinyl:
Fluance RT83 Reference > MCS 3230 Receiver > Realistic MC-500's (NOS)

Upcoming:
01/23 Phil Hanley - Comedy Works
01/30 Michael Blaustein - Comedy Works
02/08 ManyColors: J. Dilla Tribute - Dazzle
04/03 Bill Frisell - Gates Hall
04/24 Dead & Co. - Sphere
06/18 FirstGrass
06/19 TBF
06/20 TBF

Offline fmaderjr

  • Trade Count: (16)
  • Taperssection All-Star
  • ****
  • Posts: 1966
Re: Need Input On The Quality Of This Recording
« Reply #3 on: July 02, 2009, 07:46:09 PM »
Sounds great!

Your DPA's?

First time I ever recorded with my DPA 4060's in similar circumstances I got the best recording I had pulled in 8 years of recording.

Unfortunatley for me I also pulled a few bad ones with them over the next year until I learned better the circumstances in which omni's were a better choice than cards.
« Last Edit: July 03, 2009, 10:02:45 AM by fmaderjr »
AT853's (all caps)/CM-300 Franken Naks (CP-1,2,3)/JBMod Nak 700's (CP-701,702) > Tascam DR-680
Or Sonic Studios DSM-6 > M10

Offline Cheesecadet

  • Trade Count: (21)
  • Needs to get out more...
  • *****
  • Posts: 3024
  • Gender: Male
  • http://db.etree.org/cheesecadet
Re: Need Input On The Quality Of This Recording
« Reply #4 on: July 02, 2009, 08:40:08 PM »
Yeah...DPA 4061 > 9100 > h120
AKG 481's > Hi H0s > MixPre-3 |  4061's (Matched) > Tinybox v1.5 > PCM-A10 |  AT933's w/ AT853-ELE's (SC/C/O)

Vinyl:
Fluance RT83 Reference > MCS 3230 Receiver > Realistic MC-500's (NOS)

Upcoming:
01/23 Phil Hanley - Comedy Works
01/30 Michael Blaustein - Comedy Works
02/08 ManyColors: J. Dilla Tribute - Dazzle
04/03 Bill Frisell - Gates Hall
04/24 Dead & Co. - Sphere
06/18 FirstGrass
06/19 TBF
06/20 TBF

Offline fmaderjr

  • Trade Count: (16)
  • Taperssection All-Star
  • ****
  • Posts: 1966
Re: Need Input On The Quality Of This Recording
« Reply #5 on: July 03, 2009, 10:02:05 AM »
That's exactly the setup I used for my first recording with my 4060's that came out so well! Love the ST-9100!
AT853's (all caps)/CM-300 Franken Naks (CP-1,2,3)/JBMod Nak 700's (CP-701,702) > Tascam DR-680
Or Sonic Studios DSM-6 > M10

 

RSS | Mobile
Page created in 0.047 seconds with 30 queries.
© 2002-2025 Taperssection.com
Powered by SMF