Become a Site Supporter and Never see Ads again!

Author Topic: On-Stage MS7920B Good Stand For Stage Lip?  (Read 3306 times)

0 Members and 1 Guest are viewing this topic.

Offline Neilyboy

  • Trade Count: (14)
  • Taperssection Member
  • ***
  • Posts: 917
  • Gender: Male
On-Stage MS7920B Good Stand For Stage Lip?
« on: January 25, 2010, 01:56:27 PM »


Hey there, Just wondering if anyone is running an MS7920B on stage? I like that the footprint on this thing is pretty small. I am not sure if I will be running my AT853's or a full body mic (my 4041's or e70's). I was just looking for any input on which stand I should be looking at for use on stage. This one has a max of what I believe is 30" (14" for the stand and 16" boom). Will this be enough for me?

specs:
http://www.onstagestands.com/specsheets/Microphone%20Stands%20and%20Accessories/MS7920B_List.pdf

Thanks for any input you can give me!
Neil
Mic's: AKG C214's, Line Audio CM3, AT4041SP, AT853 (C, SC, O), AT943 (C, H)
Pre's: Sound Devices MixPre 2
Rec's: Sony PCM-M10, Edirol R-44, Tascam DR60D MKii, Tascam DR70D x 2

Offline Neilyboy

  • Trade Count: (14)
  • Taperssection Member
  • ***
  • Posts: 917
  • Gender: Male
Re: On-Stage MS7920B Good Stand For Stage Lip?
« Reply #1 on: January 26, 2010, 03:00:42 PM »
ah well went a head and ordered one anyways.. 25 shipped cant beat that.. Ill review it once I get it (how well it holds my 853's vs. full body mics)..

On-Stage Stands MS7920B
Short Mic Stand with 16" Boom and Compact Weighted Base - Black
Total:   $24.99

Neil
Mic's: AKG C214's, Line Audio CM3, AT4041SP, AT853 (C, SC, O), AT943 (C, H)
Pre's: Sound Devices MixPre 2
Rec's: Sony PCM-M10, Edirol R-44, Tascam DR60D MKii, Tascam DR70D x 2

Offline goodcooker

  • Trade Count: (47)
  • Needs to get out more...
  • *****
  • Posts: 5100
  • Gender: Male
  • goes to 11
Re: On-Stage MS7920B Good Stand For Stage Lip?
« Reply #2 on: January 27, 2010, 05:44:27 PM »
Gaff tape the base to the stage...that's not very much footprint to steady a full body stereo mic setup. A pull on the cable could easily send the whole thing over on it's side.

With miniature mics prob not as much of an issue.


http://www.archive.org/bookmarks/goodcooker

"Are you the Zman?" - fan at Panic 10-08-10 Kansas City
"I don't know who left this perfectly good inflatable wook doll here, but if I'm blowing her up, I'm keeping her." -  hoppedup

Offline OOK

  • Trade Count: (17)
  • Needs to get out more...
  • *****
  • Posts: 2727
  • Gender: Male
  • formerly OtherOneK
Re: On-Stage MS7920B Good Stand For Stage Lip?
« Reply #3 on: January 27, 2010, 05:50:24 PM »
or purchase a regular stage stand (these are good to have too) with the big round weighted base and just unscrew the mini stand from this base and place it on the larger base.....

peace ook

DPA/HEB 4060's > R09HR
MBHO648/KA100Lk/KA200/KA300/KA500 > SD702

Offline Neilyboy

  • Trade Count: (14)
  • Taperssection Member
  • ***
  • Posts: 917
  • Gender: Male
Re: On-Stage MS7920B Good Stand For Stage Lip?
« Reply #4 on: January 28, 2010, 08:44:30 AM »
Both are great ideas. I will hopefully be running this at six strings for the btf show next weekend as long as the band gives me the go a head.

Neil
Mic's: AKG C214's, Line Audio CM3, AT4041SP, AT853 (C, SC, O), AT943 (C, H)
Pre's: Sound Devices MixPre 2
Rec's: Sony PCM-M10, Edirol R-44, Tascam DR60D MKii, Tascam DR70D x 2

Offline Kush

  • Trade Count: (4)
  • Taperssection Member
  • ***
  • Posts: 686
  • Gender: Male
  • Catch you on the flip-side!
Re: On-Stage MS7920B Good Stand For Stage Lip?
« Reply #5 on: January 29, 2010, 01:30:26 PM »
For onstage or stage-lip I use a White Lightning LS1100, listed as The Backlight Stand. $24.95

http://www.white-lightning.com/ls1100.html

It holds a SP-LSD2 no problem and have even used it with two sets of mics at the same time (SP-LSD2 and AKG391s clamped).
AKG SE300b (CK91/CK93) or SP-LSD2 > Busman Transparency mod Tascam HD-P2

Offline Neilyboy

  • Trade Count: (14)
  • Taperssection Member
  • ***
  • Posts: 917
  • Gender: Male
Re: On-Stage MS7920B Good Stand For Stage Lip?
« Reply #6 on: January 29, 2010, 04:10:49 PM »
damnit kush where were you two days ago ;) oh well I got mine in yesterday. the base of the on-stage is 5.5lbs so it should work for my needs just like the collapsed length of that stand you posted quite a bit more than the one i got. thanks for the link though I bookmarked it for future ref (may have to get one if i get any money back from taxes this year).

Neil
Mic's: AKG C214's, Line Audio CM3, AT4041SP, AT853 (C, SC, O), AT943 (C, H)
Pre's: Sound Devices MixPre 2
Rec's: Sony PCM-M10, Edirol R-44, Tascam DR60D MKii, Tascam DR70D x 2

 

RSS | Mobile
Page created in 0.053 seconds with 31 queries.
© 2002-2025 Taperssection.com
Powered by SMF