Become a Site Supporter and Never see Ads again!
Previous topic - Next topic
Pages: Pages1   Go Down

Author Topic: 744 "clicking" issues-now with link to sample  (Read 5,656 times)

0 Members and 1 Guest are viewing this topic.

Offline Just Taper Mark from NC

  • when the bass kicks..all I need is a mic and a stage and mix.
  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 6,955
  • Dodgertown 90090
744 "clicking" issues-now with link to sample
« on: March 23, 2011, 09:37:55 PM »
so the recordings I just made with my new to me 744 have a real bad clicking noise in them,definitely hd noise of some sort.
my 722 would do but stop after a few seconds.it's almost nonstop on my mike gordon tapes from sunday?anybody else have
this problem,if so what was the fix?thanks
« Last Edit: March 24, 2011, 07:36:35 PM by Just Taper Mark from NC »
Logged
Positive vibration man.That's what makes it work.That's reggae music.You can't look away because it is real.You listen to what I sing because I mean what I sing,there's no secret,no big deal.,Just honesty,that's all."-Hon. Robert Nesta Marley 1977

Offline notlance

  • Trade Count: (6)
  • Taperssection Member
  • ***
  • Posts: 696
Re: 744 "clicking" issues
« Reply #1 on: March 23, 2011, 10:35:34 PM »
Do you have a sample recording of the problem?
Logged

Offline F.O.Bean

  • Team Schoeps Tapir that
  • Trade Count: (126)
  • Needs to get out more...
  • *****
  • Posts: 40,339
  • Taperus Maximus
    • MediaFire Recordings
Re: 744 "clicking" issues
« Reply #2 on: March 24, 2011, 12:14:13 AM »
That is WEIRD Mark?!
Logged
Schoeps MK 4V's & 41V's & KCY's ->
Naiant +60v & +48v Low Noise PFA's ->
DarkTrain Right Angle Stubby XLR's ->
Sound Devices MixPre-6 & MixPre-3

https://archive.org/details/@diskobean
http://bt.etree.org/mytorrents.php
http://www.mediafire.com/folder/j9eu80jpuaubz/Recordings

Offline page

  • Trade Count: (25)
  • Needs to get out more...
  • *****
  • Posts: 8,342
  • #TeamRetired
Re: 744 "clicking" issues
« Reply #3 on: March 24, 2011, 12:54:11 AM »
Can you recreate it via both line in and mic in (even with nothing connected)?
Logged
"This is a common practice we have on the bus; debating facts that we could easily find through printed material. It's like, how far is it today? I think it's four hours, and someone else comes in at 11 hours, and well, then we'll... just... talk about it..." - Jeb Puryear

"Nostalgia ain't what it used to be." - Jim Williams

Offline Just Taper Mark from NC

  • when the bass kicks..all I need is a mic and a stage and mix.
  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 6,955
  • Dodgertown 90090
Re: 744 "clicking" issues
« Reply #4 on: March 24, 2011, 06:04:55 PM »
yes it's an issue line or mic in.talked to jesse at SD today.he said to be sure and lock the word clock but I must be stupid
cause I'm not seeing that option.I also reset it to factory settings like he said and went back in and set things the way
I need it.lastnight I also downloaded the latest firmware and did the update and afterwards did a 5 minute test recording
and didn't have it happen.

I'm getting ready to go eat then I'm going to do  another test recording and let it run a while and see what happens before
I move further,also looking into this HD swap deal but damn.

edit:don't have a sample sorry but it's a steady..tickticktickticktick..tick tick..ticktickticktick.tick tick..
Logged
Positive vibration man.That's what makes it work.That's reggae music.You can't look away because it is real.You listen to what I sing because I mean what I sing,there's no secret,no big deal.,Just honesty,that's all."-Hon. Robert Nesta Marley 1977

Offline F.O.Bean

  • Team Schoeps Tapir that
  • Trade Count: (126)
  • Needs to get out more...
  • *****
  • Posts: 40,339
  • Taperus Maximus
    • MediaFire Recordings
Re: 744 "clicking" issues
« Reply #5 on: March 24, 2011, 06:11:34 PM »
Quote from: Just Taper Mark from NC on March 24, 2011, 06:04:55 PM
yes it's an issue line or mic in.talked to jesse at SD today.he said to be sure and lock the word clock but I must be stupid
cause I'm not seeing that option.I also reset it to factory settings like he said and went back in and set things the way
I need it.lastnight I also downloaded the latest firmware and did the update and afterwards did a 5 minute test recording
and didn't have it happen.

I'm getting ready to go eat then I'm going to do  another test recording and let it run a while and see what happens before
I move further,also looking into this HD swap deal but damn.

edit:don't have a sample sorry but it's a steady..tickticktickticktick..tick tick..ticktickticktick.tick tick..

I betcha its fixed then. Just another reason why I record to CF Cards ;)
Logged
Schoeps MK 4V's & 41V's & KCY's ->
Naiant +60v & +48v Low Noise PFA's ->
DarkTrain Right Angle Stubby XLR's ->
Sound Devices MixPre-6 & MixPre-3

https://archive.org/details/@diskobean
http://bt.etree.org/mytorrents.php
http://www.mediafire.com/folder/j9eu80jpuaubz/Recordings

Offline Just Taper Mark from NC

  • when the bass kicks..all I need is a mic and a stage and mix.
  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 6,955
  • Dodgertown 90090
Re: 744 "clicking" issues
« Reply #6 on: March 24, 2011, 06:56:39 PM »
shows up on my cf too  :(
Logged
Positive vibration man.That's what makes it work.That's reggae music.You can't look away because it is real.You listen to what I sing because I mean what I sing,there's no secret,no big deal.,Just honesty,that's all."-Hon. Robert Nesta Marley 1977

Offline Just Taper Mark from NC

  • when the bass kicks..all I need is a mic and a stage and mix.
  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 6,955
  • Dodgertown 90090
Re: 744 "clicking" issues
« Reply #7 on: March 24, 2011, 07:07:34 PM »
sample here in the beginning of my KDTU from november,this is the 722 but exact thing happened at the gordon show
nonstop the other night on the 744T  >:(

http://www.archive.org/details/KDTU2010-11-12.KDTU2010-11-12
« Last Edit: March 24, 2011, 07:09:05 PM by Just Taper Mark from NC »
Logged
Positive vibration man.That's what makes it work.That's reggae music.You can't look away because it is real.You listen to what I sing because I mean what I sing,there's no secret,no big deal.,Just honesty,that's all."-Hon. Robert Nesta Marley 1977

Offline JasonSobel

  • Trade Count: (8)
  • Needs to get out more...
  • *****
  • Posts: 3,324
    • My show list
Re: 744 "clicking" issues-now with link to sample
« Reply #8 on: March 24, 2011, 07:43:18 PM »
It's sounds just like this:
http://taperssection.com/index.php?topic=79553.0

are the serial numbers of your 722 & 744 in the affected range?  and if so, has the A/D board been replaced?  If this is the issue, it's a simple fix.
Logged

Offline Just Taper Mark from NC

  • when the bass kicks..all I need is a mic and a stage and mix.
  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 6,955
  • Dodgertown 90090
Re: 744 "clicking" issues-now with link to sample
« Reply #9 on: March 24, 2011, 08:01:35 PM »
461107 is the start of my serial # so doubt it but I will give jesse a call back and see what he thinks of this
and also get a direct email to send him the link to hear for himself.I hope it's something simple.
Logged
Positive vibration man.That's what makes it work.That's reggae music.You can't look away because it is real.You listen to what I sing because I mean what I sing,there's no secret,no big deal.,Just honesty,that's all."-Hon. Robert Nesta Marley 1977
Pages: Pages1   Go Up
Previous topic - Next topic
 

RSS | Mobile
Page created in 0.191 seconds with 33 queries.
© 2002-2026 Taperssection.com
Powered by SMF