Become a Site Supporter and Never see Ads again!

Author Topic: Neumann KM series shockmounting??  (Read 3838 times)

0 Members and 1 Guest are viewing this topic.

cleantone

  • Guest
  • Trade Count: (0)
Neumann KM series shockmounting??
« on: March 09, 2004, 09:52:25 AM »
I've been putting off shockmounts long enough. Do I really need to get the Neumann mounts? What are some alternatives? Experience with any, using KM Neumanns?

thanks

Offline dmonterisi

  • Taper Emeritus
  • Site Supporter
  • Trade Count: (2)
  • Needs to get out more...
  • *
  • Posts: 11952
  • Gender: Male
  • Stomach Full of Regret
Re:Neumann KM series shockmounting??
« Reply #1 on: March 09, 2004, 09:55:43 AM »
are you talking 140's or 184's?

cleantone

  • Guest
  • Trade Count: (0)
Re:Neumann KM series shockmounting??
« Reply #2 on: March 09, 2004, 10:26:35 AM »
The 180 series! 184 to be presise, there the silver ones too if that matters for shockmounting ;D

jpschust

  • Guest
  • Trade Count: (0)
Re:Neumann KM series shockmounting??
« Reply #3 on: March 09, 2004, 10:33:40 AM »
hahahaha, the at's are good as long as you dont care about the profiling.  while the neumann mounts are well made, they are rediculously expensive.

Offline heath

  • Laugh it up, Fuzzball...
  • Trade Count: (4)
  • Needs to get out more...
  • *****
  • Posts: 24818
  • Gender: Male
  • I'm score!!!!!!
    • The Upstream Mend
Re:Neumann KM series shockmounting??
« Reply #4 on: March 09, 2004, 12:23:35 PM »
i use at mounts with my 184s.  work fine  ;D
And the Sultans... yeah the Sultans play creole

 The Upstream Mend

Offline pnobles

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 600
  • Gender: Male
    • ME !
Re:Neumann KM series shockmounting??
« Reply #5 on: March 09, 2004, 12:41:37 PM »
i use one shockmount and made a sweet stereo bar that i can run DIN / ORTF with.  its like the AT vert bar with a shockmount in the middle...if post a pic if  i can find one...
Patrick Nobles
pnobles@udel.edu
http://udel.edu/~pnobles   <- check it out

Offline pnobles

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 600
  • Gender: Male
    • ME !
Re:Neumann KM series shockmounting??
« Reply #6 on: March 15, 2004, 10:21:10 PM »
this is a pic of my home made shock mount system.  it can go either vert. or hor. to fit all needs...sorry this picture isn't the best, but should help offer other ideas for using shock mounts.
Patrick Nobles
pnobles@udel.edu
http://udel.edu/~pnobles   <- check it out

Offline JAH

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 784
  • The kids they dance, they shake their bones!
Re:Neumann KM series shockmounting??
« Reply #7 on: March 16, 2004, 08:41:47 AM »
i use at mounts with my 184s.  work fine  ;D
WhenI ran 184's, I too had the AT's.  works fine.

fwiw
jah
Taping, it's a team sport!
km140/150>M148>mme or msbm-1
...yes screwdriver impaired
modified akg 461/2/ck8
iH120...and a slew of dat decks ;-(

Offline JAH

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 784
  • The kids they dance, they shake their bones!
Re:Neumann KM series shockmounting??
« Reply #8 on: March 16, 2004, 08:42:51 AM »
ya know...check into the Shure dougnuts...since the 184's are short they may suit you well.

peace
jah
Taping, it's a team sport!
km140/150>M148>mme or msbm-1
...yes screwdriver impaired
modified akg 461/2/ck8
iH120...and a slew of dat decks ;-(

 

RSS | Mobile
Page created in 0.054 seconds with 33 queries.
© 2002-2024 Taperssection.com
Powered by SMF