Become a Site Supporter and Never see Ads again!

Author Topic: Line Audio Design OM1, new Swedish omni  (Read 5887 times)

0 Members and 1 Guest are viewing this topic.

Offline sunjan

  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 2006
  • Gender: Male
  • Taping since 1988, 28 years of fine recordings...
    • Just a handful of stuff I put on etree
Line Audio Design OM1, new Swedish omni
« on: May 22, 2012, 05:55:40 PM »
Just saw this posted on Facebook on May 9 (http://www.facebook.com/NoHypeAudio). Not announced on the official website yet.

In stock in late June, the new Line Audio OM-1.
Price is to be determined but in the CM3 price range.

Preliminary data:
Frequency response: 20-20000Hz +-1dB
Phantom power: 12 - 48V
Current consumption: 4 mA
... Impedance: <100 Ohm
Sensitivity: 8mV/PA -42dB
S/N ratio (DIN/CCIR): 76dB(A)/66dB
Noise level: 18dB(A)
Max SPL: 133dB @0.5% THD (130dB@24V, 120dB @ 12V)
Size: 77mm x 20mm

Mics: A-51s LE, CK 930, Line Audo CM3, AT853Rx (hc,c,sc),  ECM 121, ECM 909A
Pres: Tinybox, CA-9100, UA5 wmod
Recorders: M10, H116 (CF mod), H340, NJB3
Gearbag: High Sierra Corkscrew
MD transfers: MZ-RH1. Tape transfers: Nak DR-1
Photo rig: Nikon D70, 18-70mm/3.5-4.5, SB-800

Offline OOK

  • Trade Count: (17)
  • Needs to get out more...
  • *****
  • Posts: 2727
  • Gender: Male
  • formerly OtherOneK
Re: Line Audio Design OM1, new Swedish omni
« Reply #1 on: May 22, 2012, 06:08:55 PM »
That looks cool....  I still would love to hear a set of CM3's

OOK
DPA/HEB 4060's > R09HR
MBHO648/KA100Lk/KA200/KA300/KA500 > SD702

Offline Brian Skalinder

  • Complaint Dept.
  • Trade Count: (28)
  • Needs to get out more...
  • *****
  • Posts: 18873
  • Gender: Male
Re: Line Audio Design OM1, new Swedish omni
« Reply #2 on: May 22, 2012, 06:24:44 PM »
At some point I made a half-hearted attempt to buy a QM12i Quad.  Unfortunately, I never heard back from LA.  Anyway, the OM1 looks neat, nice and small.
Milab VM-44 Links > Fostex FR-2LE or
Naiant IPA (tinybox format) > Roland R-05

Offline JP Gerard

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 68
    • NoHype Audio
Re: Line Audio Design OM1, new Swedish omni
« Reply #3 on: June 18, 2012, 10:20:13 AM »
Hi folks, I've been asked to come and join back... I though Tapressection had vanished! I see it's alive and well.

So regarding Line Audio, the OM-1 will be in stock later this month but as far as I'm concerned my small stock is presold... I should get more from Sweden around August.

Re: the QM12i as well as the ST and SM models... they will most likely end up being replaced with new, lighter, smaller designs. No idea on price or availability. For now, they're unavailable and will be for some time.

Hope this helps.
« Last Edit: June 18, 2012, 10:24:23 AM by JP Gerard »
JP Gerard
------------------------------------------------
NoHype Audio
http://www.nohypeaudio.com/
NoHype Studio
http://www.nohypestudio.be/
_ADK ))) microphones
http://www.adkmic.com

Offline Chuck

  • Trade Count: (42)
  • Needs to get out more...
  • *****
  • Posts: 10811
  • Gender: Male
  • time between the notes...
    • My recordings on the LMA
Re: Line Audio Design OM1, new Swedish omni
« Reply #4 on: June 18, 2012, 11:07:37 AM »
I know there has been lots of talk about the OM3 here over the years. I think US based tapers were reluctant to purchase them because it wan't easy to get a hold of the guy that makes them and there was worries about VAT fees etc... If someone in the US starts stocking them, I bet they will sell.
Reality is merely an illusion, albeit a very persistent one.

Microphones: AKG C 480 B comb-ULS/ CK 61/ CK 63, Sennheiser MKE 2 elements,  Audix M1290-o, Micro capsule active cables w/ Naiant PFA's, Naiant MSH-1O, Naiant AKG Active cables, Church CA-11 (cardioid), (1) Nady SCM-1000 (mod)
Pre-amps: Naiant littlebox, Naiant littlekit v2.0, BM2p+ Edirol UA-5, Church STC-9000
Recorders: Sound Devices MixPre-6, iRiver iHP-120 (Rockboxed & RTC mod)

Recordings on the LMA: http://www.archive.org/bookmarks/ChuckM
Recording website & blog: http://www.timebetweenthenotes.com

Offline JP Gerard

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 68
    • NoHype Audio
Re: Line Audio Design OM1, new Swedish omni
« Reply #5 on: June 18, 2012, 11:11:52 AM »
There's no VAT but in some states there could be import duty. But it's a small % and we're talking small amounts so it's not a problem - basically what you'd expect to pay in state tax.

Wasn't there someone stocking Line Audio in the states, or ws it in Canada... I'll se if I can find it.
JP Gerard
------------------------------------------------
NoHype Audio
http://www.nohypeaudio.com/
NoHype Studio
http://www.nohypestudio.be/
_ADK ))) microphones
http://www.adkmic.com

Offline JP Gerard

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 68
    • NoHype Audio
Re: Line Audio Design OM1, new Swedish omni
« Reply #6 on: June 18, 2012, 03:12:06 PM »
Ah, I thought it was 1100 USD or so... so far all the CM3's I've sent to the US were delivered without further tax on delivery, value is always way under those amounts anyway.

Oh, I checked the reseller's location I metioned, he was in Canada... I'll ask Line Audio if they have anyone in the US right now.
JP Gerard
------------------------------------------------
NoHype Audio
http://www.nohypeaudio.com/
NoHype Studio
http://www.nohypestudio.be/
_ADK ))) microphones
http://www.adkmic.com

Offline JP Gerard

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 68
    • NoHype Audio
Re: Line Audio Design OM1, new Swedish omni
« Reply #7 on: June 18, 2012, 04:20:56 PM »
Reply from Line Audio: no, no USA resellers at the moment. Dealers who'd be interested can contact Line Audio for dealer pricing and terms.
JP Gerard
------------------------------------------------
NoHype Audio
http://www.nohypeaudio.com/
NoHype Studio
http://www.nohypestudio.be/
_ADK ))) microphones
http://www.adkmic.com

Offline Roger Gustavsson

  • Trade Count: (1)
  • Taperssection Member
  • ***
  • Posts: 423
Re: Line Audio Design OM1, new Swedish omni
« Reply #8 on: June 19, 2012, 09:39:58 AM »
I got some information from Roger Jönsson, the man who runs Line Audio here in Sweden. Production will start soon, still waiting for capsules. Right now, there is a large demand for the CM3. Something like 20-20000 Hz within +- 1dB can be expected from the 10 mm capsules.

Roger (not Jönsson!)

Offline dlh

  • Trade Count: (3)
  • Taperssection Member
  • ***
  • Posts: 265
  • Gender: Male
Re: Line Audio Design OM1, new Swedish omni
« Reply #9 on: June 19, 2012, 10:22:03 AM »
That looks cool....  I still would love to hear a set of CM3's

OOK

My CM3's are on the way, (but you might hear them on a band concert) ;D
Dave
480b, 460b, Line Audio CM3, SP LSD2, AT BP4025, SP C4,
MiniMe, MiniMP, AND ANNOUNCING the recent adoption of a Mini-Dac. The little bro's are SO excited  :yahoo:

DR-680, DR-100 MKII, PMD671, fr2LE, MTII

De gustibus non est disputandum.
"It's just this little chromium switch here.  You people are soo superstitious."

 

RSS | Mobile
Page created in 0.051 seconds with 34 queries.
© 2002-2024 Taperssection.com
Powered by SMF