Become a Site Supporter and Never see Ads again!

Author Topic: Can anyone help identify these mics?  (Read 3962 times)

0 Members and 1 Guest are viewing this topic.

Offline NotoriousTIMP

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 28
Can anyone help identify these mics?
« on: March 23, 2013, 04:05:39 PM »
I just picked up a used DAT (Denon D80) and these mics came with the rig. I have no idea what brand/type of microphones these are  :facepalm: so bare with me and my noobish questions!

Thanks!

The taper formerly known at Trentsinmypants :)

adrianf74

  • Guest
  • Trade Count: (0)
Re: Can anyone help identify these mics?
« Reply #1 on: March 23, 2013, 04:28:49 PM »
Definitely Audio Technica.  And definitely Sound Professionals.  I'm willing to go with an older version of the SP-CMC-4 (based on the AT853).  To know what capsule, you'll need to know the letter or graphic on it (which isn't shown).

I had the SP-CMC-8's (old AT933's) which had that rotating clip shrinkwrapped on the outside so after digging around, I can confirm these are the 4's.  Odds are they've never been 4.7k modded so you're gonna run into distortion if you're at a loud show with them.

Offline NotoriousTIMP

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 28
Re: Can anyone help identify these mics?
« Reply #2 on: March 23, 2013, 04:48:27 PM »
How can I tell if these are modded or not?

*EDIT* It also came with a pre-amp box, this would help to prevent distortion right?
« Last Edit: March 23, 2013, 04:52:15 PM by NotoriousTIMP »
The taper formerly known at Trentsinmypants :)

Offline F.O.Bean

  • Team Schoeps Tapir that
  • Trade Count: (126)
  • Needs to get out more...
  • *****
  • Posts: 40703
  • Gender: Male
  • Taperus Maximus
    • MediaFire Recordings
Re: Can anyone help identify these mics?
« Reply #3 on: March 23, 2013, 04:57:30 PM »
How can I tell if these are modded or not?

*EDIT* It also came with a pre-amp box, this would help to prevent distortion right?

The preamp just brings the mics signal up to a line level. The mics will still distort!
Schoeps MK 4V's & MK 41V's & 250|0 KCY's ->
Naiant +60v & +48v Low Noise PFA's ->
DarkTrain Right Angle Stubby XLR's ->
Sound Devices MixPre-6 & MixPre-3

https://archive.org/details/@diskobean
http://bt.etree.org/mytorrents.php
http://www.mediafire.com/folder/j9eu80jpuaubz/Recordings

adrianf74

  • Guest
  • Trade Count: (0)
Re: Can anyone help identify these mics?
« Reply #4 on: March 23, 2013, 05:15:50 PM »
How can I tell if these are modded or not?

*EDIT* It also came with a pre-amp box, this would help to prevent distortion right?

Odds are there as never a mod performed to those (by the age/condition).   Preamp only helps give the mics juice but, as Bean's pointed out, they'll distort.

Offline LikeASong

  • Trade Count: (11)
  • Taperssection Member
  • ***
  • Posts: 520
  • Gender: Male
    • U2start.com
Re: Can anyone help identify these mics?
« Reply #5 on: March 23, 2013, 05:54:51 PM »
They definitely look like a -well used, tbh- pair of Audio Technica 853's. Try recording a loud sound source (home stereo cracnked up), if they distort they're def. not modded. If they don'¡t distort you can try to bring them to a live concert and record with them; odds are that they might distort even there anyways if they're not modded. Good luck :)
The worst things in the world are justified by belief.
-U2

After silence, that which comes nearest to expressing the inexpressible is music.
-Aldous Huxley

Offline willndmb

  • Trade Count: (17)
  • Needs to get out more...
  • *****
  • Posts: 6822
  • Gender: Male
Re: Can anyone help identify these mics?
« Reply #6 on: March 23, 2013, 08:12:32 PM »
maybe i have been lucky but the only time mine have distorted was being feet from the stack or not powered correctly
Mics - AKG ck61/ck63 (c480b & Naiant actives), SP-BMC-2
XLR Cables - Silver Path w/Darktrain stubbies
Interconnect Cables - Dogstar (XLR), Darktrain (RCA > 1/8) (1/8 > 1/8), and Kind Kables (1/8f > 1/4)
Preamps - Naiant Littlebox & Tinybox
Recorders - PCM-M10 & DR-60D

 

RSS | Mobile
Page created in 0.044 seconds with 31 queries.
© 2002-2025 Taperssection.com
Powered by SMF