Become a Site Supporter and Never see Ads again!
Previous topic - Next topic
Pages: Pages1   Go Down

Author Topic: Can someone line up an AUD/SBD for me?  (Read 9,273 times)

0 Members and 1 Guest are viewing this topic.

Offline vwmule

  • Trade Count: (16)
  • Needs to get out more...
  • *****
  • Posts: 2,173
Can someone line up an AUD/SBD for me?
« on: June 28, 2016, 10:09:37 PM »
Is there an expert out there? Seems an easy job if you know what you are doing, as the sources are from an F8. I could send links to the raw files. Just need them married up and I'll do the rest of the post production.
Logged

Offline hoserama

  • Trade Count: (1)
  • Taperssection Member
  • ***
  • Posts: 585
Re: Can someone line up an AUD/SBD for me?
« Reply #1 on: June 29, 2016, 10:52:31 AM »
So the sources are already time aligned, you're just adjusting for the delay?

Just find a drum hit and nudge it over.
Logged
Audio: Countryman B3 + AT853(hypers/cards/subcards) + SBD feeds
Wireless Receivers: Lots of those
Antennas: Lots of those
Cables: Lots of those
Recorders: TE TX-6, Zoom L20R, Zoom F8, (3) Tascam 680, (3) Tascam 2D, Zoom H6, and a graveyard of irivers/nomads/minidiscs.

Offline dnuggs

  • Trade Count: (11)
  • Taperssection Member
  • ***
  • Posts: 316
  • Festivaaaaal!!!
Re: Can someone line up an AUD/SBD for me?
« Reply #2 on: June 29, 2016, 12:27:13 PM »
Hit up Capnhook, he is the man for this
Logged

Offline goodcooker

  • Trade Count: (47)
  • Needs to get out more...
  • *****
  • Posts: 5,287
Re: Can someone line up an AUD/SBD for me?
« Reply #3 on: June 29, 2016, 01:18:02 PM »
Quote from: vwmule on June 28, 2016, 10:09:37 PM
Is there an expert out there? Seems an easy job if you know what you are doing, as the sources are from an F8. I could send links to the raw files. Just need them married up and I'll do the rest of the post production.

Depending on what you use for software all you have to do is load both files, move the SBD source forward in time as many milliseconds as your mics were from the center of the stage, listen, move it one way or the other a few ms until it sounds right and you are done!

I use Wavelab. It takes 5 minutes. I use the phase scope as well. You can literally see the scope tighten up when you get it right.
Logged
http://www.archive.org/bookmarks/goodcooker

"Are you the Zman?" - fan at Panic 10-08-10 Kansas City
"I don't know who left this perfectly good inflatable wook doll here, but if I'm blowing her up, I'm keeping her." -  hoppedup

Offline capnhook

  • All your llamas are belong to us....
  • Site Supporter
  • Trade Count: (20)
  • Needs to get out more...
  • *
  • Posts: 5,457
  • All your llamas are belong to us....
Re: Can someone line up an AUD/SBD for me?
« Reply #4 on: June 29, 2016, 05:59:09 PM »
Sure, I'll attempt it.  Please send me a PM and we can figure out a Dropbox or WeTransfer or something.

Kevin
Logged
Proud member of the reality-based community

BSCS-L->JB-mod [NAK CM-300 (CP-3) and/or (CP-1)]->LSD2->CA CAFS-Omni->Sony ECM-907**Apogee MiniMe Rev. C->CA Ugly II->**Edirol OCM R-44->Tascam DR-22WL->Sony TCD-D8


"Don't ever take an all or nothing attitude when it comes to making a difference
and being beautiful and making the world a beautiful place through your actions.
Every little bit is registered.  Every little bit.  So be as beautiful as you can as often as you can"

"It'll never be over, 'till we learn."
 
"My dream is to get a bus and get the band and just go coast to coast. Just about everything else except music, is anti-musical.  That's it.  Music's the thing." - Jeb Puryear

Offline capnhook

  • All your llamas are belong to us....
  • Site Supporter
  • Trade Count: (20)
  • Needs to get out more...
  • *
  • Posts: 5,457
  • All your llamas are belong to us....
Re: Can someone line up an AUD/SBD for me?
« Reply #5 on: June 29, 2016, 06:01:58 PM »
Quote from: goodcooker on June 29, 2016, 01:18:02 PM

I use Wavelab. It takes 5 minutes. I use the phase scope as well. You can literally see the scope tighten up when you get it right.


Wow it's got a phase scope?  I have never used Wavelab, but NOW I'll give it a try.......thanks goodcooker.
Logged
Proud member of the reality-based community

BSCS-L->JB-mod [NAK CM-300 (CP-3) and/or (CP-1)]->LSD2->CA CAFS-Omni->Sony ECM-907**Apogee MiniMe Rev. C->CA Ugly II->**Edirol OCM R-44->Tascam DR-22WL->Sony TCD-D8


"Don't ever take an all or nothing attitude when it comes to making a difference
and being beautiful and making the world a beautiful place through your actions.
Every little bit is registered.  Every little bit.  So be as beautiful as you can as often as you can"

"It'll never be over, 'till we learn."
 
"My dream is to get a bus and get the band and just go coast to coast. Just about everything else except music, is anti-musical.  That's it.  Music's the thing." - Jeb Puryear

Offline capnhook

  • All your llamas are belong to us....
  • Site Supporter
  • Trade Count: (20)
  • Needs to get out more...
  • *
  • Posts: 5,457
  • All your llamas are belong to us....
Re: Can someone line up an AUD/SBD for me?
« Reply #6 on: June 29, 2016, 11:28:54 PM »
Quote from: capnhook on June 29, 2016, 06:01:58 PM
Quote from: goodcooker on June 29, 2016, 01:18:02 PM

I use Wavelab. It takes 5 minutes. I use the phase scope as well. You can literally see the scope tighten up when you get it right.


Wow it's got a phase scope?  I have never used Wavelab, but NOW I'll give it a try.......thanks goodcooker.

Ugh, phase scope is only available in Pro version.

I'm not a pro, too rich for me.

Wish I could locate a plug-in....
Logged
Proud member of the reality-based community

BSCS-L->JB-mod [NAK CM-300 (CP-3) and/or (CP-1)]->LSD2->CA CAFS-Omni->Sony ECM-907**Apogee MiniMe Rev. C->CA Ugly II->**Edirol OCM R-44->Tascam DR-22WL->Sony TCD-D8


"Don't ever take an all or nothing attitude when it comes to making a difference
and being beautiful and making the world a beautiful place through your actions.
Every little bit is registered.  Every little bit.  So be as beautiful as you can as often as you can"

"It'll never be over, 'till we learn."
 
"My dream is to get a bus and get the band and just go coast to coast. Just about everything else except music, is anti-musical.  That's it.  Music's the thing." - Jeb Puryear

Offline StarkRavingCalm

  • Trade Count: (4)
  • Taperssection Member
  • ***
  • Posts: 541
Re: Can someone line up an AUD/SBD for me?
« Reply #7 on: June 30, 2016, 11:43:42 AM »
Try using Reaper. The 'nudge" feature is perfect for this.
I use it to line up files from two different source all the time.
Logged

Offline capnhook

  • All your llamas are belong to us....
  • Site Supporter
  • Trade Count: (20)
  • Needs to get out more...
  • *
  • Posts: 5,457
  • All your llamas are belong to us....
Re: Can someone line up an AUD/SBD for me?
« Reply #8 on: July 01, 2016, 07:11:59 PM »
Shortened file returned......matrix away!  Glad to help
Logged
Proud member of the reality-based community

BSCS-L->JB-mod [NAK CM-300 (CP-3) and/or (CP-1)]->LSD2->CA CAFS-Omni->Sony ECM-907**Apogee MiniMe Rev. C->CA Ugly II->**Edirol OCM R-44->Tascam DR-22WL->Sony TCD-D8


"Don't ever take an all or nothing attitude when it comes to making a difference
and being beautiful and making the world a beautiful place through your actions.
Every little bit is registered.  Every little bit.  So be as beautiful as you can as often as you can"

"It'll never be over, 'till we learn."
 
"My dream is to get a bus and get the band and just go coast to coast. Just about everything else except music, is anti-musical.  That's it.  Music's the thing." - Jeb Puryear

Offline tim in jersey

  • Trade Count: (8)
  • Needs to get out more...
  • *****
  • Posts: 3,912
Re: Can someone line up an AUD/SBD for me?
« Reply #9 on: July 07, 2016, 04:09:19 PM »
Quote from: StarkRavingCalm on June 30, 2016, 11:43:42 AM
Try using Reaper. The 'nudge" feature is perfect for this.
I use it to line up files from two different source all the time.

D/Led and installed Reaper and took it for a spin. I dug out a fairly recent 4 track SBD+AUD recording I made lined the 2 sources up with the "nudge" feature. Wow, that is a handy little tool.

I'm strongly considering purchasing. And I see it runs in WINE so I can use it on my Linux box too!

Logged

Offline stantheman1976

  • Trade Count: (2)
  • Taperssection All-Star
  • ****
  • Posts: 1,093
Re: Can someone line up an AUD/SBD for me?
« Reply #10 on: July 18, 2016, 01:54:52 PM »
If no one else has been able to take care of it let me know. I have lined up different sources tons of time in Vegas.
Logged

Offline ts

  • Trade Count: (82)
  • Needs to get out more...
  • *****
  • Posts: 3,695
Re: Can someone line up an AUD/SBD for me?
« Reply #11 on: August 24, 2016, 03:57:38 PM »
So is Reaper the one to go with? I've been using Audition and find it to cumbersome.
Logged

Offline Ronmac

  • Trade Count: (1)
  • Taperssection Member
  • ***
  • Posts: 326
Re: Can someone line up an AUD/SBD for me?
« Reply #12 on: August 24, 2016, 07:52:49 PM »
It is an easy job to nudge when you only have a couple of stereo tracks to align. For more complex tasks (large drum kits with several room mics or complex orchestral setups), or if I am in a hurry, I use Melda Productions MAutoALign plugin. Works great!

https://www.meldaproduction.com/MAutoAlign
Logged
Pages: Pages1   Go Up
Previous topic - Next topic
 

RSS | Mobile
Page created in 0.099 seconds with 36 queries.
© 2002-2026 Taperssection.com
Powered by SMF