Topic: Diginoise with Schoeps MK41s (Read 7,212 times)

crazylegs · « **on:** May 25, 2018, 04:17:48 AM »

Hi,
The last few shows I have recorded with my M10 MK41s and tiny box have been riddled with spots of diginoise. I was wondering if anyone knows what might be the cause of the problem. Any help would be appreciated.
Thanks!

Sebastian · « **Reply #1 on:** May 25, 2018, 06:03:29 AM »

Do you have other capsules that you can test to make sure the MK41s are really the problem here?

Have you tried different cables? Because 9 out of 10 times, problems like these are usually caused by a bad solder joint in a cable connector.

Gordon · « **Reply #2 on:** May 25, 2018, 08:21:52 AM »

you didn't mention the deck being used either.......

heathen · « **Reply #3 on:** May 25, 2018, 08:37:36 AM »

Quote from: Gordon on May 25, 2018, 08:21:52 AM
you didn't mention the deck being used either.......

Looks like M10

Gordon · « **Reply #4 on:** May 25, 2018, 08:44:44 AM »

Quote from: heathen on May 25, 2018, 08:37:36 AM
Quote from: Gordon on May 25, 2018, 08:21:52 AM
you didn't mention the deck being used either.......
Looks like M10

oops. not enough coffee yet! in that case was the card formatted prior to the shows?

gewwang · « **Reply #5 on:** May 25, 2018, 09:48:49 AM »

When I first started stealthing, I quickly learned to secure the cable to the recorder so that the mini cable couldn't move at all. Even if the cable is fine, it could create that digi-noise in the recording when it moved around at all.

Author Topic: Diginoise with Schoeps MK41s (Read 7,212 times)

crazylegs

Diginoise with Schoeps MK41s

Sebastian

Re: Diginoise with Schoeps MK41s

Gordon

Re: Diginoise with Schoeps MK41s

heathen

Re: Diginoise with Schoeps MK41s

Gordon

Re: Diginoise with Schoeps MK41s

gewwang

Re: Diginoise with Schoeps MK41s