News:
Become a Site Supporter Today!
Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Home
Help
Search
Login
Register
Donate
Become a
Site Supporter
and Never see Ads again!
Taperssection.com
»
Gear / Technical Help
»
Post-Processing, Computer / Streaming / Internet Devices & Related Activity
»
Topic:
edirol ua-5 > soundforge help???
« previous
next »
Print
Pages: [
1
]
Go Down
Author
Topic: edirol ua-5 > soundforge help??? (Read 1280 times)
0 Members and 1 Guest are viewing this topic.
millhouse412
Trade Count:
(
0
)
Taperssection Regular
Posts: 77
Gender:
ahh-ooo-mmmm
edirol ua-5 > soundforge help???
«
on:
January 28, 2005, 12:41:49 PM »
So i am running my DAT to my computer through the USB in my UA-5 to Soundforge 6.0.
Question...
The recoding level green bar things in soundforge, should i try to keep these low or high or in the middle?? so basiclly how to adjust the output level from teh UA-5 when recording to soundforge....High or low...which is better
Logged
Oktava Mk-012>Ua-5>(D8/Jb3)
rerem
Trade Count:
(
0
)
Taperssection Regular
Posts: 57
Re: edirol ua-5 > soundforge help???
«
Reply #1 on:
February 01, 2005, 04:52:57 AM »
Levels should be on the high end but don't clip. SF has undo,find a loud section and if you get too close to the top/clipping or the red clipping thing shows up,stop,undo,lower the level
Logged
Brian Skalinder
Complaint Dept.
Trade Count:
(
28
)
Needs to get out more...
Posts: 18873
Gender:
Re: edirol ua-5 > soundforge help???
«
Reply #2 on:
February 01, 2005, 09:15:49 AM »
If you're sending a digital signal from your DAT through the UA5 to your PC via USB:
DAT 7-pin > S/PDIF coax > UA5 > USB > PC
Then you don't need to - can't - adjust the levels in Soundforge. If you're running the DAT into the UA5 via an analog signal:
DAT line-out > UA5 analog-in > USB > PC
Spend a few bucks on a 7-pin / coax cable so you can do digital transfers! If that's not an option, set your peak levels using the UA5 and - since the UA5 has a single light for indicating peak levels - use Soundforge to monitor L/R balance.
Logged
Milab VM-44 Links > Fostex FR-2LE or
Naiant IPA (tinybox format) > Roland R-05
Print
Pages: [
1
]
Go Up
« previous
next »
Taperssection.com
»
Gear / Technical Help
»
Post-Processing, Computer / Streaming / Internet Devices & Related Activity
»
Topic:
edirol ua-5 > soundforge help???