Hi folks I did a lot of search but still I really really need help here.
I would try to record the up-coming tour of Jeff Beck
with OKM-II rock>A3>TCD-D100 (Line-in Recoding on Sony DAT Recorder).
As I read the postings about A3’s settings here, I decided that I would set A3 as follows:
1) Low Frequency Roll Off / The switch position “-“(linear) is chosen.
(300Hz attenuation is way too much.)
2) Linear Attenuation
The switch position "0" is chosen because I would record it line-in on DAT.
I tested this setting on my sound system and realized that setting the recording level
above “5” would start running into the distortion problem or peak over.
So I am thinking that I should try to record “4” but I am not so sure
.
If you recorded Jeff’s show or anybody else’s show of heavy guitar with
driving bass setting with OKM before, please let me know your opinion about my
setting described above.
I was asked to record the show by this good friend of mine who gave us
tickets for free. I don't want to let him down
.
Any suggestion and opinion would be highly appreciated
.
Tom&Jerry