Become a Site Supporter and Never see Ads again!
Previous topic - Next topic
Pages: Pages1   Go Down

Author Topic: Iriver 120: Preamp or not?  (Read 3,191 times)

0 Members and 1 Guest are viewing this topic.

Offline Popmarter

  • Trade Count: (2)
  • Taperssection Member
  • ***
  • Posts: 772
    • Live Music Archive
Iriver 120: Preamp or not?
« on: January 17, 2006, 01:22:00 PM »
You can plug mics straight into the line-in of the Iriver without a batterybox and you can record. It is powered from the Iriver battery (correct me if i am wrong). Do i still need to use my (simple) batterybox (that also has 3 settings for preamp)? 
Logged
(Past) Recorders: Zoom F3; SD MixPre 3 II; Sony A10; Edirol R44; Sony M10; Sony WM-D6; iRiver IHP-120; Sharp MD-MT20; Sharp MD-MT190
(Past) Microphones: Schoeps MK41; Nevaton MC59/S (cards); Milab VM-44 Links (cards), AT853 7.4mod (cards); AT831 (cards); Nakamichi CM300 (all CP's); Soundman OKM II Rock Studios
Preamps: Riotbox; Beyerdynamic MV100; JK Laboratories DVC-X-17b; Naiant IPA; Nakamichi MX-100 modded for 9v battery use ; Baby Nbox

Offline jkoch

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 836
  • groovy!
Re: Iriver 120: Preamp or not?
« Reply #1 on: January 31, 2006, 06:51:25 AM »
i personally would. i'm guessing that without the "protection" of the battery box that preamp could overload and brickwall.
Logged
Schoeps MK4s > active cables > NBox+ > Edirol R-09HR
Pages: Pages1   Go Up
Previous topic - Next topic
 

RSS | Mobile
Page created in 0.051 seconds with 25 queries.
© 2002-2026 Taperssection.com
Powered by SMF