Become a Site Supporter and Never see Ads again!

Author Topic: Best shockmounts for 460/480's and Shure vert bar  (Read 13770 times)

0 Members and 1 Guest are viewing this topic.

Offline Nick's Picks

  • Trade Count: (33)
  • Needs to get out more...
  • *****
  • Posts: 10270
  • Gender: Male
  • I thought I heard.......
Re: Best shockmounts for 460/480's and Shure vert bar
« Reply #30 on: May 12, 2006, 05:48:26 PM »
SSM-5
http://www.nadywireless.com/products/accessories_pgs/accessories_2.html

and that fatty black one for the LSD2.  same construction as the stock nickle one.

Offline spyder9

  • Trade Count: (82)
  • Needs to get out more...
  • *****
  • Posts: 13226
  • Gender: Male
  • "Are you Zman?"
    • My Archived shows

Offline johnw

  • Trade Count: (11)
  • Needs to get out more...
  • *****
  • Posts: 3824
  • Gender: Male
    • My cd List
Re: Best shockmounts for 460/480's and Shure vert bar
« Reply #32 on: May 12, 2006, 06:43:41 PM »
SSM-5
http://www.nadywireless.com/products/accessories_pgs/accessories_2.html

and that fatty black one for the LSD2.  same construction as the stock nickle one.

I got one of these hoping it would work, but the sled is too wide maybe 22+. The 460 body is way loose in it. Maybe the one I got was a fluke though.
Schoeps MK41 & MK4V  |  Schoeps CMC6, Schoeps KCY, AKI/2C, PFA, Nbox Cable/PFA  |  Grace V2, Nbox Platinum  |  SD744T, SD MixPre 6, Sony PCM M10

Canon 16-35mm/2.8L mkii, 24-70mm/2.8L, 70-200mm/2.8L IS, 50mm/1.8 mkii, 135mm/2L, 100mm/2.8L IS, Sigma 35mm/1.4 A  |  Canon 5D mk4

Offline spyder9

  • Trade Count: (82)
  • Needs to get out more...
  • *****
  • Posts: 13226
  • Gender: Male
  • "Are you Zman?"
    • My Archived shows
Re: Best shockmounts for 460/480's and Shure vert bar
« Reply #33 on: May 12, 2006, 07:46:56 PM »
I use these:

http://cgi.ebay.com/SHOCKPROOF-RUBBER-CONDENSER-MICROPHONE-CLIPS_W0QQitemZ7403163363QQcategoryZ29948QQssPageNameZWD1VQQrdZ1QQcmdZViewItem


Has anyone used these with a 390?  The 390's are a few mm's slimmer than the 480's I think.  For the price it would
nice to keep a set of these in the bag.



They have them out there in different sizes.  The smallest is 19mm.  The 20mm fits the 460/480s perfectly.  Nice and snug, but not difficult to pull out. 

Offline Nick's Picks

  • Trade Count: (33)
  • Needs to get out more...
  • *****
  • Posts: 10270
  • Gender: Male
  • I thought I heard.......
Re: Best shockmounts for 460/480's and Shure vert bar
« Reply #34 on: May 12, 2006, 07:50:47 PM »
they are a little wide, even for the peluso's.  but a little bit of electrical tape on the mic body and they fit all nice nice

 

RSS | Mobile
Page created in 0.048 seconds with 29 queries.
© 2002-2024 Taperssection.com
Powered by SMF